NM300-3_2002.docVIP

MERCOSUR STANDARD NM-300-3:2002 First edition2002-12-30 Safety of toysPart 3: Migration of certain elements MERCOSURSTANDARDIZATION ASSOCIATION Contents Introduction1 Scope 2 Normative references 3 Definitions 4 Requirements 4.1 Specific requirements4.2 Interpretation of results5 Principle 6 Reagents and equipment 6.1 Reagents 6.2 Apparatus7 Selection of test samples8 Preparation and extraction of samples of test 8.1 Film of painting, enamels, varnishes, paint, printing, polymers and films similar 8.2 Polymeric materials and similar, including with the increased textiles, but excluding other textile 8.3 Paper and paperboard8.4 Natural or synthetic textiles8.5 Materials vitreous / ceramic / metal 8.6 Other materials are in mass or color not (see Annex C )8.7 Materials intended to leave a trace (mark) 8.8 Malleable materials for modeling, including bodies of shape and gels 8.9 Paints, including paints to paint with your fingers, enamels, varnishes, powder to varnishing and similar materials in liquid or solid form9 Determination of the quantity of elements10 Report testAnnexes A (normative) Requirements of sieves B (informative) Selection of procedureC (informative) Content and justifications to the requirements and test methods mentioned in this part of standardD (informative) Bibliography Foreword The AMN – MERCOSUR Standardization Association – aims to promote and adopt the actions for the development and harmonization of standards under the Southern Common Market – MERCOSUR, and is integrated by the National Standardization Bodies of the member countries. The AMN develops its standards activity through CSM – MERCOSUR Sectorial Committees – created to fields of action clearly defined. The Draft MERCOSUR Standards, prepared under the CSM, are circulated to national voting through the Standards National bodies of member countries. The publication as MERCOSUR Standard through MERCOSUR Standardization Association requires