Carbrushlesselectronicspeedregulator(ESC)manual.docVIP

Car brushless electronic speed regulator (ESC) manual Thank you for buying the companys products, in order to avoid unnecessary losses caused by incorrect use, please read this manual carefully, and operate strictly in accordance with the instructions. Our does not assume any responsibility for the loss caused by the use of this product, also does not assume any responsibility caused by users are allowed to modify the products. Product features The multiple protection function: battery low voltage protection, over temperature protection, throttle control protection, blocking protection. The proportional brake: 4 maximum braking regulation, 8 drag brake adjustment, 4 initial braking force regulation. Can be programmed using single - power transfer on the button, and button to restore the factory settings function. It supports a variety of parameter programming. Product type and specification parameters 型号 25A 35A 60A 120A 持续电流/峰值电流 18A/50A 35A/190A 60A/380A 120A/760A 支持电机类型 无感无刷 无感无刷 无感无刷 无感无刷、有感无刷 适用车型 1:18电房 1:10电房/电越 1/10电房和电越 1/10和1/12电房电越Stock竞赛，1/10和1/8攀岩车 内阻 0.01欧姆 0.0015欧姆 0.0007欧姆 0.0006欧姆 电池节数 2-3节锂电，4-9节镍氢电池 2-3节锂电，6-9节镍氢电池 2-3节锂电，6-9节镍氢电池 2-3节锂电，4-9节镍氢电池 BEC输出 6V/1A 6V/1.5A 6V/1.5A 5V/3A 尺寸 31.5mm(长)*24mm（宽）*15mm(高，减除风扇) 31.5mm(长)*27mm（宽）*24mm（高，减除风扇） 31.5mm(长)*27mm（宽）*24mm（高，减除风扇） 43mm（长）*36mm（宽）*33mm（高） 重量 19g（不含引线重量） 30g(不含引线重量) 32g（不含引线重量） 80g（不含引线重量） Use steps NO.1 The first step according to the use of the motor to the correct connection. Note: 1. Pick a brushless motor: when using Hall sensor brushless motor, the motor lead wire of the sensor received a sensor socket, power transfer through signal detection sensor socket of the automatic identification is feeling motor or motor. And the motor with a motor, electric adjustable output line a, B, and C, respectively, to a, B, C linked shall not freely exchanged. Brushless motor: when the use of brushless motor without a brush, the output line A, B, C can be connected with the motor l