接连杆的数控车削加工工艺与编程_毕业设计.docVIP

毕 业 院/专 业 机械工程学院/ 数控技术 班 级 数控1011 学 号 1001443137 学生姓名 徐作轮 指导教师： 关键词 ： 工艺分析　加工方案　 进给路线　控制尺寸 Abstract With the continuous development of numerical control technology and application field expands, nc machining technology to the national economy and peoples livelihood some important industry (IT, automobile, light industry, medical, etc.) is playing a more and more important role in the development, because the efficiency, quality is the main part of the advanced manufacturing technology. High speed and high precision processing technology can greatly improve efficiency, improve the quality and grade of products, shorten production cycle and enhance market competition ability. For the nc machining, manual programming or automatic programming before will be made of parts manufactured by technology analysis, drafting processing scheme, choosing the appropriate cutting tool and cutting parameter is determined, to some process problems (such as the cutting point, processing route etc.) also need to do some processing. And master the methods of control accuracy in machining process, can produce qualified products. In this paper, according to the characteristics of the nc machine tool, in view of the specific parts, process analysis, scheme of equipment, cutting tool and cutting parameter selection, determine the processing order and processing route, the nc machining programming. Through the whole process of the process, fully embodies the nc equipment in the guarantee machining accuracy, efficiency, simplify the working procedure such as advantage. Key words: industrial analysis processing scheme Feed line control dimensions 目 录 第1章 前 言 1 第2章 工艺方案分析 2 2.1 零件图 2 2.2 零件图分析 4 2.3 确定加工方法 4 2.4 确定加工方案 5 2.5 定位基准的选择与选择原则 8 2.6　装夹方式的选择 8 2.7 选择数控刀具和选择原则 9 2.8 确定切削用量 10 第3章 连接杆的加工 12 3.1零件加工 12 3.2手工编程 13 第4章 结束语 18 第5章 致谢词 19 参考文献 20 第1章 前 言 在机械加工工艺教学中，机械制造专业学生及数控技术专业学生都要学习数控车床操作技术。让学生了解相关工种的先进技术，同时培养工作岗位的前瞻性；在讲授数控知识的同时，必须要求学