（精）TLV自由浮球疏水阀.pptVIP

内容 蒸汽疏水阀的分类 机械式蒸汽疏水阀 机械式蒸汽疏水阀 TLV自由浮球式蒸汽疏水阀 TLV的自由浮球式蒸汽疏水阀( 自由浮球阀 ) 构造 构造 什么是 X-元件 ? 热敏液体的沸点 开启的状态 关闭的状态 自由浮球 自由浮球 自由浮球 自由浮球 空气排放 冷凝水流入 自由浮球开启 冷凝水排放 冷凝水排放 冷凝水排放 蒸汽疏水过程 蒸汽疏水过程 蒸汽疏水过程 水封运行 冷凝水排放 冷凝水排放 各种力之间的关系 各种力之间的关系 各种力之间的关系 各种力之间的关系 各种力之间的关系 各种力之间的关系 各种力之间的关系 浮力 浮力 运行模式 运行模式 运行模式 TLV自由浮球蒸汽 疏水阀  ( 三支撑点式阀座 ) 构造 构造 双金属片 双金属片 空气排放 冷凝水的排放 蒸汽疏水过程 冷凝水排放 TLV自由浮球式 蒸汽疏水阀 ( 优点 ) 处理效率 水的封阻过程 节能 长寿命 水锤 工作表面的硬化处理 集合的过滤器 良好空气排放性能 在线维修 TLV疏水阀种类特点及小结 良好的空气排放性 水锤 耐久性 耐久性 无蒸汽泄漏 容易维修保养 小结 疑问? 索引 As the condensate level rises and the float becomes buoyant, the force created by the buoyancy increases gradually. The trap will the open when this overcomes the y component of the valve closing force and weight. It is important to remember that as previously stated, the float and orifice modulate condensate discharge and the trap does not simply open and close. This is explained in more detail in the following slide. The float can move completely away from the orifice. The orifice is then fully open to discharge condensate. . As condensate is discharged and steam enters the trap, the float will start to sink. . The float will naturally move in the direction of discharged condensate which means the float moves towards the orifice. As the free float gets close to the orifice, the float starts to cause a flow restriction. The condensate velocity in the area of the orifice / float increases to cause a localized area of low pressure. When there is no condensate coming in the trap to keep the float buoyant the larger pressure acting over the area of the float pushes the float onto the orifice seat. Note that the float doesn’t “slam” back onto the seat, and that the previous free motion of the float creates an almost infinite number of valve faces to close against the seat. Wear of the valve (the surface of the float) is therefore negligible and service life is extremely good. At all times the level of condensate held in the trap is such that the valve orifice is a