于基三极管 lm386红外发射接收模块_本科毕业论文.docVIP

摘 要 红外线是近距离，高速无线通信的一种手段，作为一种近距离，室内通信手段，红外线具有无线电无法比拟的优势。 本文介绍的系统是利用红外通信信道构成红外无线近程设备控制系统，可以满足无线控制的需要。本文主要阐述了红外线通信的工作原理与实现方法，红外线无线通信过程，详细的分析了系统设计中的每一个模块，得出了这一系统的最佳实施方案，成功的完成了系统的设计。本系统分为3个模块：电源模块，红外线发射模块，红外线接收模块。电源模块采用了7805组成的5V电源。红外线发射模块中主要是采用三极管，LM386将接收到的信号进行电压放大和功率放大以及红外线发射管。在红外线接收模块中主要是采用三极管，LM386将接收到的信号进行电压放大和功率放大以及红外线接收管。其系统实现的功能是利用红外发光管和红外光接收模块作为收发器件，传输距离为2米。 关键词：红外线发射管 红外线接收管 LM386音频集功放器  Abstract Infrared ray is close, a means of high-speed wireless communication, as a kind of close, indoor means of communication, infrared has incomparable advantage over radio. System is introduced in this paper by using the infrared communication channel constitute the infrared wireless short-range equipment control system, can meet the needs of the wireless control. This article mainly expounds the working principle and implementation method of infrared communication, infrared wireless communication process, a detailed analysis of each module of the system design, the best scheme of this system are derived, successfully completed the design of the system. This system is divided into three modules: voice module, the infrared emission module, the infrared receiving module. Power supply module adopts the 7805 of 5 v power supply. mainly used in infrared emission module triode, LM386 will receive the signal voltage amplifier and power amplifier and infrared transmitting tube. Mainly used in infrared receiving module triode, LM386 will receive the signal voltage amplifier and power amplifier and infrared receiving tube. The function of system implementation is the use of infrared light-emitting tube as the transceiver devices and infrared receiving module, transmission distance is 2 meters. keyword: Infrared Diodes Infrared Receiving Tube Set The Audio Power Amplifier 目 录 摘 要 I Abstract II 第一章 总体设计方案 1 1.1 红外通信的发展背景 1 1.2 总体设计方案 2 1.3 电源模块模块论证与选择 2 1.4 红外光发射模块论证与选择 3 1.6 系统各模块的最终方案