高某层住宅楼结构设计计算书高层建筑框架剪力墙结构设计--本科毕业论文.doc

高层住宅楼结构设计 摘 要 本工程为依景花园A1栋，拟建高层住宅楼。根据现场的土地使用面积将该楼设计成一对称布置的住宅楼，设置一部电梯，一层设置四户。首层的标高为3.9米，其余11层的层高均为2.9m。楼层总高度为35.8m。总建筑面积4319.28m2。基本风压值0.65kN/m2，抗震设防烈度7度，设计基本地震加速度值为0.10g，Ⅱ类场地，设计地震分组为第一组。 本工程结构设计采用框架-剪力墙结构，结构计算按纵向框架承重分析。具体内容包括：结构方案和初选截面尺寸；楼板结构设计；结构计算简图及刚度参数计算；荷载计算及结构位移验算；水平荷载作用下的结构内力分析；竖向荷载作用下的结构内力分析；荷载效应及内力组合；截面设计和构造要求；基础设计；结构施工图的绘制；计算机辅助设计。在进行截面抗震设计时，柱按偏压构件计算，保证延性框架要“强剪弱弯，强柱弱梁，强节点弱构件强锚固”的设计原则，且满足构造要求。 关键词：高层，抗震，框剪，结构设计 A1 Block Of King Garden In High-rise Residential Buildings, Structural Design Abstract King Garden in the works for A1 block, the proposed high-rise residential buildings. According to the land use area will be carried into a symmetrical layout design of residential buildings, the installation of a lift, one of four households. The level of the first floor is 3.9m and the remaining eleven floors are 2.9m high-level layers. The total height of the building is 35.8m. A total construction area is 4319.28m2. Basic wind pressure value is 0.65kN/m2, earthquake intensity of 7 degrees security, the basic design for seismic acceleration values 0.10g, category II sites, design for the earthquake-first group. This engineering construction design adoption the frame-shear wall construction. The structure of the vertical longitudinal loading analysis. Concrete contents include: structural programmes and primary cross-sectional size; floor structural design; Structural calculation diagrammatic drawing and stiffness parameter calculation; Structural load calculation and displacement calculation; Level load role of endogenous force structure analysis; Vertical load role of the endogenous force structure analysis; Load effects and endogenous force portfolio; Cross-sectional design and construction requirements; Foundation design; Structural construction mapping; computer-aided design. Earthquake in cross-sectional design, pillar by bias components calculated to ensure extensive framework to strong reminder and weak bends, strong column and weak beam, strong joint