摘 要
随着城市快速经济的增长及人口的高度集中,城市隧道及地下工程的修建日益迫切。
本设计题目是青岛市地铁一期工程(3号线)中山公园站2号风道支护,主要设计内容有:二次衬砌荷载的计算和配筋,初期支护设计,施工管理,监测方案等。
为有效控制隧道工程安全风险,避免或减少坍方事故发生,应以“充分调动围岩的承载能力,有效控制围岩变形和松弛”为设计理念,按新奥法原理进行软弱围岩隧道设计。软弱围岩隧道具有自稳差、易坍塌的工程特点,因此在这类围岩中施工必须根据隧道开挖后可能产生的变形实态,采取相应应对措施,如:采取控制地表面下沉及拱脚下沉的技术;大管棚超前支护: Pre-grouted big tube canopy
关键词:软弱围岩隧道;新奥法;变形;施工管理
Abstract
With rapid growth of urban economy and concentration of population, it becomes urgent to construct urban tunnel and underground projects. But urban tunnel’s construction faced a lot of problems; soft rock is just one of them. So the main purpose of this design is to deal with the different problems in construction of tunnels in soft rock, control the deformation and the relaxation of wall rock in tunnel excavation process, reduce the construction temporary support, to prevent collapse, improving and enhancing the technical levels of existing.
The designed topic is Qingdao subway (line 3) zhong shan park station 2# ventilation tunnel support, the paper includes: lining load calculation; primary support design; reinforcement calculation of the secondary lining of tunnel; construction management; the monitoring plan; etc.
For effective control of tunnel construction safety risk, avoid or reduce a cave-in occurred, we should use The New Austrian Tunneling Method in design of tunnels in soft rock based on the design method—fully mobilize the bearing capacity of wall rock, to effectively control it’s deformation and relaxation. The soft and weak rock tunnel has project characteristics of poor stability and easy collapse. So construction must be based on the tunnel excavation in this type of surrounding rock deformation may be produced after the solid state and adopt corresponding technical countermeasures, such as: Take the control of ground surface subsidence and the arch feet sink technical countermeasures and so on; Pre-grouted big tube canopy.
Keywords: Tunnels in soft rock; Support in advance; New Austrian Method; Constructio
您可能关注的文档
- 车汽排放污染的控制措施与研究--本科毕业设计.doc
- 车汽空调系统检修--本科毕业设计.doc
- 车汽某支架冲压工艺及模具设计--本科毕业设计.doc
- 车汽天窗的整体结构设计--本科毕业设计.doc
- 车汽票订票系统--本科毕业设计.doc
- 车汽尾气质量检测系统设计--本科毕业设计.doc
- 车汽液压制动系统的特点与故障诊断 汽车专业--本科毕业设计.doc
- 车停场信息管理系统的研究--本科毕业设计.doc
- 车汽遥控防盗报警器的设计--本科毕业设计.doc
- 成集加速度传感器的软件设计 --本科毕业设计.doc
- 岛青啤酒公司营销大区内部管理问题研究--本科毕业设计.doc
- 岛青市滨海公路第六标段施组设计--本科毕业设计.doc
- 到回桃花源徐州月亮湾生态园项目计划书--本科毕业设计.doc
- 道管公司物料流通管理系统的设计与实现--本科毕业设计.doc
- 道管公司物料流通管理系统设计与实现--本科毕业设计.doc
- 道管清淤机器人及控制系统研究--本科毕业设计.doc
- 道轨交通10号线吴中路钻孔灌注桩施工方案--本科毕业设计.doc
- 床车主轴箱箱体左侧8m8螺纹攻丝机设计1有全套cad图纸--本科毕业设计.doc
- 德广县防灾减灾、科技中心工程施组设计--本科毕业设计.doc
- 得安物流运输组织绩效评价研究--本科毕业设计.doc
原创力文档

文档评论(0)