毕设论文—电梯远程监控系统数据采集器的软件设计.docVIP

南京工业大学电梯远程监控系统数据采集器的软件设计 摘　要 现代电梯已经实现远程监控的目标，但监控实时性效果不甚明显。本课题以工业现场通讯和以太网通讯方法为基础，采用数据采集技术，对采集的电梯故信号进行测试，实现了对电梯运行状态的实时监控。 本文以电梯在城市生活中的广泛应用为课题背景，论述了电梯远程监控系统数据采集器的开发过程，主要完成课题中数据采集器软件部分设计。首先介绍了电梯远程监控系统的发展现状和其发展趋势。其次，介绍了数据采集器所承担的主要功能和各主要组成部分。另外，本文还介绍了电梯远程监控系统在楼群，小区等日常生活中的应用。 本文最后提出了设计中的一些不足之处和对今后的一些要求。论文结尾附有系统的电路原理图、系统的PCB图和系统的主程序。 关键词：电梯　　数据采集　远程监控 Design of data collector software system of remote monitoring of elevator Abstract Nowadays the goal of remote monitoring of elevator has been achieved, but the effect of real-time monitoring is not very obvious. This paper based on the industrial site communication method and the Ethernet communication method, uses the data collection technology, does some tests on the collected fault signal of elevator and realizes real-time monitoring of elevator’s status. This paper uses the wide application of elevator in the city life as the subject background ,expounds the development process of elevator’s remote monitoring system data collection and completes the software design of the data collector . Firstly it introduces the current situation of the development of the remote monitoring system and its development trend. Secondly, this paper introduces the data collector device’s main functions and main parts. In addition, this paper also introduces the application of remote monitoring system of elevator in buildings and the plot in the daily life. At last this paper puts forward some deficiencies and requirements for the future of the design . At the end of this paper is the main program of remote monitoring system and the circuit principle and PCB chart of the whole system . Keywords: elevator; stm32f107vct6 ; data collector; remote monitoring 目　　录 摘　要 I Abstract II 第一章 绪 论 1 1.1概述 1 1.2电梯远程监控系统的发展现状及其发展趋势 1 1.3电梯监控系统技术的介绍以及应用 2 1.4电梯远程监控系统数据采集器的发展现状与应用前景 3 1.5本文的主要工作 3 第二章 电梯远程监控系统数据采集器的硬件电路设计 5 2.1系统总体方案设计 5 2.2系统硬件接口介绍 5 2.2.1 USB模块 5 2.2.2 模数转换模块 6 2.2.3 RS232串口模块 6 2.2.4 RS485通讯模块 7 2.2.5以太网模块 7 2.2.6 CAN总线模块 8 第三章 电