GDSD500射频导纳物位开关..docVIP

GDSD500射频导纳物位开关 GDSD500RADIO FREQUENCY(RF) ADMITTANCE LEVEL CONTROLLER 概述 Introduction GDSD500系列射频导纳物位开关是一种新颖的物位测量仪表，它采用先进的射频导纳技术，克服了电容式物位计不能消除导电挂料影响的缺陷，仪表具有运行可靠，适用于几乎所有工业现场。仪表还具有安装方便，免维护，低价位等特点, 广泛用于石油、化工、冶金、医药、电力、食品、造纸等工业领域。 GDSD500series RF admittance level controller is a new level instrument.It adopts advantage RF admittance technology and overcomes the defect that capacitive level transmitter cant eliminate the influence of conductivc coating on sensor.Due to its stable operating ,it is used in almost all the industry site.With easy installing、no maintainence、low price ，the instrument is applied for petroleum 、chemical engineering、 metallurgy 、pharmacy 、electric power、 foodstuff and paper product. 结构原理 Construction Principle 该物位开关由传感器单元和电子单元组成。传感器单元主要包括三部分：测量探极、屏蔽极及接地端。物料的高度 反映为探极与容器壁间导纳的变化，当物料到达开关工作点时，电子单元作出反应，驱动继电器动作，输出开关信号。 屏蔽极可防止由于电极上有挂料而产生误动作信号，仅当物料真正达到设置点时，继电器才输出信号。 The controller consist of sensor and circuit .The sensor has three parts: measuring detector、 shielding detector and ground terminal.The change of admittance between detector and tank wall reflects to material height.When material height reachs controller working point,electric part acts to make the relay output switch signal.The shielding detector can prevent conductivc coating on sensor from error action.Only material height reachs set point really,the relay outputs the signal. 参数 Parameters 特点：开关控制，射频导纳原理，NULL-KOTE抗粘附电子线路。 Characteristic:switch control,RF admittance principle, NULL-KOTE resist-adherence electric circuit 电源：220VAC 50/60Hz 或24VDC 100mA Power: 220VAC 50/60Hz or 24VDC 100mA 继电器容量：DPDT，117/220VAC,5A无感3A有感 Relay capacity: DPDT, 117/220VAC,5A non-inductive 3A inductive 灵敏度：小于0.3pF Sensitivity:less than 0.3pF 探头耐温：-184℃～+260℃ Detector rating Temp.: -184℃～+260℃ 电路部分耐温：-40℃～+80℃ Circuit part rating Temp.: -40℃～+80℃ 失电保护模式：采用高低模式，现场可调 Fail-Safe: adopt high-low mode, adjustable at site 延时可调：0-30秒 Delay adjustable:0-30s 防爆等级Explosion proof classification:本安型Intrinsically safe type: