Packgagingmachinemanual(XH-TM-100)..docVIP

SEMI-AUTOMATIC PACKAGING MACHINE XH-TM-100 OPERATION MANUAL SHANGHAI XUHUAN ELECTRONIC CO., LTD. No.981 XINGHUA ROAD, JIANGQIAO TOWN, JIADING DISTRICT, SHANGHAI CHINA TEL: +86-02159131326 FAX: +86-021 http//:www.  1. Machine characteristics 1.1 Application This machine is semi-automatic carrier tape packaging machine, Mainly used for patch components package in tape. SMD components including: SMD crystal resonator, SMD oscillator，all kinds of IC patch, patch capacitance, patch inductance, patch diode, patch transistor. General according to customers needs to build. 1.2 Features a）Packing type: Manual load components that convenient and fast for different width and different specifications of the tape to change. b）Applicable tape with width: 8mm-88mm black or transparent carrier tape. c）Sealing way: Applicable heat sealing tape and the sticky cover with tape. Can preset parameters such as components number, components interval, carrier tape speed and the heating temperature. Also can set work mode as discontinuous/continuous, cold sealing/heat sealing. d）Liquid crystal display, PLC automatic control winding, detection and counting, hot sealing etc. function. Concentrated control and simple operation of all state parameter setting. Machine shows powerful function. e) The automatic optical count, Ensure component packaging count accurately. By SMC pneumatic components control stable performance and durability. Basic structure 2.1 Feeding unit The machine with the feeding shaft far right for 13 inch and 22 inch feed plate. (the machine without automatic control feed unit) 2.2 Width adjustment device In the machine base left and right each have a black knobs. Loosen the knob can adjust guide rail width front and rear. Free adjustment with tape width. The biggest travel for: 88mm. After width adjustment, tighten black knobs, locked the guide rails. 2.3 Cover with feeding device In the upper right machine with a cover of feeding