基于PSSE环境的自定义建模研究解析.docVIP

摘 要 随着电网网络的日益发展，电网对电力系统分析仿真软件的要求也日渐提高。电力系统仿真成为研究电网一个重要的工具，单一的仿真软件对国家电网进行的仿真已经不能满足实际研究的需要。国内目前使用的机电暂态仿真工具主要是中国版BPA和PSASP，随着电网的日益复杂，两者在使用中都存在一定的局限。PSS/E是由美国电力技术公司（PTI）开发的一款综合性软件，在国际上使用是非常广泛的。PSS/E的仿真规模非常大，利于超大规模系统计算。PSS/E还自带模型自定义功能、用户可以直接参与交互式计算过程控制，同时PSS/E还鼓励用户在自带程序模块不能满足研究需要时通过自己编写子程序来实现。 本文主要对PSS/E自定义模块对比，暂稳态分析、动态潮流计算进行了简单的建模和计算，通过和已知的结果进行对比分析，借此来验证PSS/E这一电力仿真软件的实用性。经过结果表明，PSS/E的计算结果与实际结果虽然存在误差，但误差都在接受范围之内，也就是说，PSS/E在电力系统分析与仿真上是可以应用在国内电网网络上的。 关键词：PSS/E；暂态仿真；自定义建模；潮流计算  Abstract With the increasing development of the grid network, power grid for power system analysis simulation software requirements are also rising. Power system simulation has become an important tool for research on Power Grid. Simulation of a single national grid simulation software can not meet the needs of the actual research,The electromechanical transient simulation tools currently used in domestic is mainly Chinese version of BPA and PSASP .But as the network becomes more and more complex, they both in use there are certain limitations. PSS/E is a USA Power Technologies Inc （PTI） the development of a comprehensive software, for international use is very wide. The scale of PSS/E is very large,very large scale system to calculate. PSS/E also comes with a custom function model, users can directly participate in interactive computing process control, at the same time, PSS/E also encourages users to achieve in their own program module can not meet the research needs through their own written subroutine. This paper focuses on the PSS/E power flow calculation, transient analysis, dynamic power flow calculation model and calculation simple and known, through comparative analysis of the results, to verify the practicality of the power simulation software PSS/E. Key words: PSS/E; Transient; simulation; The custom modeling; Power flow  目 录 摘 要 I Abstract II 第一章 绪 论 1 1.1研究背景 1 1.1.1 PSS/E概述 1 1.1.2 PSS/E的优势 3 第二章 PSS/E软件介绍 5 2.1 PSS/E工作原理 5 2.2 PSS/E动态仿真