智能變电站自动化系统工程调试技术实施路线探讨.docVIP

智能变电站自动化系统工程调试技术实施路线探讨 摘 要：智能变电站自动化系统工程是国家电网公司智能化发展战略部署的重要构成部分，当前已在全国各地市公司陆续投产运营。然而因智能变电站自动化系统工程发展的新锐特征，诸多地市单位针对新建智能变电站工程开展调试工作，欠缺相应的实践技术经验，若依然沿用常规型变电站的调试验收思路进行工程调试验收，必将导致以往所不存在的诸多问题发生，从而影响智能变电站的投运进度，也为自动化系统的正常运行遗留下安全隐患。基于此，本文立足于国家电网公司智能变电站自动化系统结构与调试框架体系原则，统筹智能变电设备功能配置特征，以实现智能变电站自动化系统功能应用为目的，探讨了工程调试的技术标准、实施路线及调试要点，以期达到实践层面的有机升华。 关键词：智能变电站；自动化系统；工程调试；技术路线 Abstract：Intelligent substation as an important part of State Grid Corporation’s smart grid strategies has been put into operation in prefecture level companies across the country．However，there is still lacking of practical experiences in the debugging of newly—built smart substation for those companies．If the smart substation was commissioned，in spec ted and accepted using the conventional method，then in practice some new problems will be encountered which would affect the progress and operation of the substation and bring safety risks to its normal operation．Based on this, this article based on the state grid corporation of intelligent substation automation system and debugging framework technology such as the principle, overall automation systems, intelligent substation equipment and the technical features of the functional configuration, and function of intelligent substation automation system as the main line, for the purpose of application implementation, this paper discusses the engineering commissioning of technical standards, implementation route and key points for debugging principles, in order to achieve the practical level of organic sublimation. Key words：intelligent substation；Automation system; Engineering commissioning; Technical route 一、智能变电站自动化系统特点分析 智能变电站自动化系统是基于传统变电站综合系统技术展开的拓展延伸，相比传统变电站系统，智能变电站自动化系统在结构、现场连接、网络通信及应用方式等方面更为科学标准化，便于系统的维护拓展，也更吻合未来智能化系统功能快速更新的高级应用目标。 从系统技术服务层面来讲：智能变电站自动化系统所面对的服务对象是为站内一次设备，系统的基础作用是切实满足电网智能运行要求、保障一次设备的运行安全。自动化系统二次智能设备配置，所具有的核心功能即科学测量、控制、保护变电站一次设备，以此作为基础进一步实现数据的智能整合应用及无人值班等目标[1] 。 从系统结构层面划分：智能变电站自动化系统功能可分为两类，一类是系统功能，也即是站控层功能，依据多智能环节、设备构成，如站域控制、监控、远动、综合决策功能。一类是系统基