30萬吨污水处理厂初步设计.doc

30万吨污水处理厂初步设计 摘要：随着城建设的加快和人口的增加，污水越来越多，水体自净建设污水处理厂通过一级物理法和二级生物法对污水进行处理后，以减轻水体的自净负担reliminary Design for Sewage Treatment Plant of 300,000 Tons Directive teacher:Deng Chao-sheng(lecture) Abatract: With the acceleration of urban construction and population increases, More and more sewage over the water self-purification capacity. Therefore, building a sewage treatment plant,Through physical and biological methods of sewage treatment and then its emissions. To reduce the burden of self-purification of water, To purify water and protect the environment. Design flow for the 300,000 t / d, a large sewage treatment plants.Design uses anoxic aeration activated front of the stage sludge process.Its set up to improve the performance of sludge settlement and avoid sludge expansion to denitrification, reduce the phenomenon of secondary sedimentation tank sludge floating phenomenon, and so on. Aeration stage of the organic load more evenly distributed of the oxygen demand, Increase aeration tanks the utilization of air and the ability to work.. At the same time it can according to request to change the flow of water points, Running on greater flexibility. The wastewater treatment plant for the sewage treatment process: Sewage from the pumping station to the grid, Desilting tank into the aeration, Radiation streaming into the initial sedimentation tanks, Into the choice of hypoxia,Aeration tanks entered the stage, Convergent flow into the secondary sedimentation tank, Into contact with pool, Finally the water; Sludge treatment process: The remaining sludge from the initial sedimentation tanks and secondary sedimentation tanks into the sludge thickening pool, Then enter the sludge digestion tank, After further dehydration equipment, Finally mud cake Sinotrans. Its operating costs: If including depreciation charges, 0.31 yuan / t sewage;If excluding the depreciation costs, 0.13yuan / t sewage. Key words: 300,000 t / d; Activated sludge; Pre-hypoxia;Stage aeration; Sl