学士学位论文___数控机床伺服系统的故障诊断.doc

数控机床伺服系统的故障诊断 摘要 数控机床伺服系统故障占机床总故障的比率较高。由于伺服系统涉及的环节较多，加之种类繁多、技术原理各具特色，给维修诊断带来困难，因此归纳一 些故障诊断方法很有必要。 数控机床坐标轴的移动定位是由位置伺服系统来完成的。位置伺服系统一般采用闭环或半闭环控制。(半)闭环控制的特点就是任一环节发生故障都可能导致系统定位不准确、不稳定或失效。诊断定位故障环节就成为维修的关键。根据伺服系统的控制原 理和系统接口的特性，对系统进行分解判断，已成为行之有效的方法。本文结合维修实例介绍了位置环和速度环诊断方法。 NC machine tool servo system fault diagnosis Abstract NC machine tool servo fault of the machine high percentage of total failure. As part of the servo system more, plus a wide range of technical principle with their own characteristics, the maintenance and diagnosis difficult, summed up some fault diagnosis method is necessary. ????? CNC machine tools coordinate axis of mobile location by location to complete the servo system. The general location of the closed-loop servo systems or semi-closed-loop control. (Semi-) closed-loop control is one of the characteristics of link failure may lead to inaccurate positioning system, instability or failure. Failure on the part of positioning as a key maintenance. Servo control system in accordance with the principles and characteristics of the system interface, the system decomposition judgement, has become a proven method. Based on the location of maintenance example, Central, Central and speed diagnosis method. 目录 摘要···········································1 Abstract·····································1 1．数控机床伺服系统环故障诊断·······················3 2．SIEMENS伺服系统的故障诊断与维修···················5 3.6RA26系列直流伺服系统的故障诊断与维修················7 3．16RA26**系列直流伺服驱动器简介···············7 3.2 该系列直流伺服驱动器控制板的组成··············7 3.3该直流伺服驱动器的状态指示·····················8 3.4该系列直流伺服驱动器的常见故障····················9 3．3.5该系列直流伺服驱动器的检测与调整··················10 4.FANUC伺服系统的故障诊断与维修··························17 4.1 FANUC直流伺服系统的故障诊断与维修················17 4.2 SCR速度控制单元的常见故障与维修····················17 5．PWM速度控制单元的常见故障与维修···················23 5.1CRT无报警显示的故障维修?························23 5.2速度控制单元上的指示灯报警···················25 6．直流伺服电动机的故障诊断与维修············