物联网的设与应用.doc

论文分类号： 学校代码： 题目： 物联网的设计与应用 二〇一二年六月 Content of Network Design and Application ABSTRACT Content is defined through the network, the infrared sensors, RFID global positioning system, laser scanner, sensing device information such as agreed by agreement, any items and Internet connection, exchange information and communication, to realize intelligent identification, location, tracking and monitoring and management of a network. Technically, understand networking understanding means object through the intelligent inductive devices, through the transmission network, reaches the specified information processing center, and finally realize, between people and objects of automation information interaction and processing of intelligent network. All of the hardware circuit are discussed in detail, including serial LED drive control mode and the working principle, the A/D converter, inquires the keyboard, the temperature sensor of application, etc. Then the software also made A careful thinking, according to the module are structured programming, including display and keyboard, A/D conversion, temperature control and temperature sensor programming instructions and draw the procedure flow chart. The whole system debugging. Temperature control system can be realized through NTC the mistor temperature will convert the amplifier amplification voltage signal, entered on the A/D conversion chip into digital LED display, through static in decimal form display circuit, also showed that the circuit will also set temperature value and through the keyboard can change the size of the data The RFID signal transmitter and base with GPS and temperature controller will connect and networking。 KEYWORDS: Content networking FDID signal transmitter, Temperature controller, GPS, relay. 物联网的设计与应用 摘要 物联网的定义是：通过射频识别、红外感应器、全球定位系统、激光扫描器等信息传感设备，按约定的协议，把任何物品与互联网连接起来，进行信息交换和通讯，以实现智能化识别、定位、跟踪、监控和管理的一种网络。 从技术上理解，物联网理解是指物体通过智能感应装置，经过传输网络，到达指定的信息处理中心，最终实现物