Mold rass plating nickel.docVIP

Mold brass plating nickel-cobalt-iron process ? Abstract: Cr, Ni-Cr, Ni-Fe. Development and application of coatings of Ni-Co, Ni-Co-Fe in the copper mold, elaborate on the pros and cons of more than five coatings, a detailed description of the superiority of the mold brass plating nickel and cobalt iron. Introduction: the crystallization of copper tube erosion due to long withstand the high temperature molten iron in the course of their work, there are more serious friction and wear, damage the main form of thermal cracking, wear and corrosion; partial damage to the surface of the often causing the entire component failure, eventually leading to the equipment scrapped. According to statistics, the price of a mold in the 0.7-20 million of the rule of the annual consumption of copper mold 1o billion yuan to roll metallurgical supplies; and copper and copper alloy resources are scarce, and prices there are rising trends in the recent past; and therefore improve the wear resistance and heat resistance of the brass surface of the mold is a fundamental measure of economic efficiency and productivity, with a good scientific significance and practical value . Seeking an alternative to chromium, and instead of the composite plating process to become the most important thing. ? 1, the mold surface treatment of the copper tube Surface treatment technology, namely the use of various physical, chemical or mechanical process side, the method of surface access to the special composition, organizational structure and performance, to improve its wear corrosion resistance, and extend the life of technology, but also can be described as surface processing. Commonly used surface technology: welding technology, fusion bonded technology, electroplating, electro plating and electroless plating technology, non-metallic plating techniques, thermal spraying technology, physical and chemical vapor deposition, chemical heat Management, laser surface treatment, electron beam technology transfo