串口助手步骤cj.docVIP

建立SCOMM程序串口助手 背景：vc++2005，不需要什么特殊空间（spcomm之类的什么都不需要） 打开vc++2005，新建MFC AppWizard,名字SCOMM，基于对话框的。确定完成。 建立界面如下： 代码如下： SCOMMDlg.cpp // SCOMMDlg.cpp : 实现文件 // #include stdafx.h #include SCOMM.h #include SCOMMDlg.h #ifdef _DEBUG #define new DEBUG_NEW #endif // 用于应用程序“关于”菜单项的CAboutDlg 对话框 class CAboutDlg : public CDialog { public: CAboutDlg(); // 对话框数据 enum { IDD = IDD_ABOUTBOX }; protected: virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV 支持 // 实现 protected: DECLARE_MESSAGE_MAP() }; CAboutDlg::CAboutDlg() : CDialog(CAboutDlg::IDD) { } void CAboutDlg::DoDataExchange(CDataExchange* pDX) { CDialog::DoDataExchange(pDX); } BEGIN_MESSAGE_MAP(CAboutDlg, CDialog) END_MESSAGE_MAP() // CSCOMMDlg 对话框 CSCOMMDlg::CSCOMMDlg(CWnd* pParent /*=NULL*/) : CDialog(CSCOMMDlg::IDD, pParent) , m_ReceiveData(_T()) , m_strSendData(_T()) { m_hIcon = AfxGetApp()-LoadIcon(IDR_MAINFRAME); //自己添加初始化变量值 m_bAutoSend=FALSE; m_bStopDispRXData=FALSE; m_bOpenPort=FALSE; m_nCycleTime=1000; } void CSCOMMDlg::DoDataExchange(CDataExchange* pDX) { CDialog::DoDataExchange(pDX); //接收区域 DDX_Control(pDX, IDC_COMBO_COMSELECT, m_Com); DDX_Control(pDX, IDC_COMBO_SPEED, m_Speed); DDX_Control(pDX, IDC_COMBO_STOPBITS, m_StopBits); DDX_Control(pDX, IDC_COMBO_DATABITS, m_DataBits); DDX_Control(pDX, IDC_COMBO_PARITY, m_Parity); DDX_Control(pDX, IDC_BUTTON_STOPDISP, m_ctrlStopDisp); DDX_Control(pDX, IDC_CHECK_HEXRECIEVE, m_ctrlHexReceieve); DDX_Control(pDX, IDC_BUTTON_OPENPORT, m_ctrlOpenPort); DDX_Control(pDX, IDC_EDIT_RECIVE, m_ctrlReceiveData); DDX_Text(pDX, IDC_EDIT_RECIVE, m_ReceiveData); DDX_Control(pDX, IDC_CHECK_AUTOCLEAR, m_ctrlAutoClear); //2个计数的 DDX_Control(pDX, IDC_STATIC_RXCOUNT, m_ctrlRXCOUNT); DDX_Control(pDX, IDC_STATIC_TXCOUNT, m_ctrlTXCount); DDX_Control(pDX, IDC_BUTTON_COUNTRESET, m_ctrlCounterReset);//清空计数 //发送区域 DDX_Control(pDX, IDC_BUTTON_MANUALSEND, m_ctrlManualSend); DDX_Control(pDX, IDC_CHECK_AUTOSEND, m_ct