RIP路由置命令.docVIP

RIP路由配置 1.在R1、R2、R3上配置ip地址 Router#en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#line con 0 Router(config-line)#exec-timeout 0 0 Router(config-line)#logg sync Router(config-line)#exit Router(config)#no ip domain-lookup Router(config)#hostname R1 R1(config)#int lo 0 R1(config-if)#ip add 192.168.1.1 255.255.255.0 R1(config-if)#ip add 192.168.1.2 255.255.255.0 secondary R1(config-if)#ip add 192.168.1.3 255.255.255.0 secondary R1(config-if)#no shut R1(config-if)#exit R1(config)#int s0/0 R1(config-if)#ip add 12.1.1.1 255.255.255.0