ADG1439-1438使用手册.docx

FEATURES 特征Serial interface up to 50 MHz 串行接口50MHzSDO daisy-chaining option SDO菊花链选项9.5 Ω on resistance @ 25°C 导通电阻 9.5Ω1.6 Ω on-resistance flatness 导通电阻平坦1.6ΩFully specified at ±15 V/+12 V/±5 V 范围：±15 V/+12 V/±5 V 3 V logic-compatible inputs 兼容3v逻辑电平输入Rail-to-rail operation（翻译成汉语即 “轨到轨”，指器件的输入输出电压范围可以达到电源电压。）20-lead TSSOP and 20-lead, 4 mm × 4 mm LFCSP packages 20针，4 mm × 4 mm引脚封装APPLICATIONS 应用Relay replacement 代替继电器Audio and video routing 音频和视频路由Automatic test equipment 自动测试设备Data acquisition systems 数据采集系统Temperature measurement systems 温度采集系统Avionics 航空电子设备Battery-powered systems 电池供电系统Communication systems 通讯系统Medical equipment医疗设备ADG1439原理框图GENERAL DESCRIPTION简要介绍The ADG1438 and ADG1439 are CMOS analog matrix switches with a serially controlled 3-wireinterface. The ADG1438 is an 8-channel matrix switch, and the ADG1439 is a dual 4-channel matrix switch. ADG1438与ADG1439是一款CMOS模拟多路复用开关，带有连续3线控制接口。其中ADG1438是8路单端复用开关，1439是双4路复用开关。The ADG1438/ADG1439 use a versatile 3-wire serial interface that operates at clock rates of up to 50 MHz and is compatible with standard SPI, QSPI?, MICROWIRE?, and DSP interface standards. The output of the shift register, SDO, enables a number of the ADG1438/ADG1439 parts to be daisy-chained. On power-up, the internal shift register contains all zeros, and all switches are in the off state.芯片使用标准3线接口，传输频率可高达50MHz，同时与SPI/QSPITM/MICROWIRETM/SPI 以及DSP标准接口等兼容。移位输出寄存器，SDO，使能一定数量的ADG1438/1439内部开关量置位。在上升沿，内部移位寄存器置0，所有的开关处于关闭状态。Each switch conducts equally well in both directions when on, making these parts suitable for both multiplexing and demulti-plexing applications. Because each switch is turned on or off by a separate bit, these parts can also be configured as a type of switch array, where any, all, or none of the eight switches can be closed at any time. The input signal range extends to the supply rails. All channels exhibit break-before-make switching action, preventing momentary shorting when switching channels. 每个开关对模拟量双向导通，