热电偶使用说明书.docVIP

隔 爆 热电偶使用说明书 INSTRUCTIONS OF Explosion-proof THERMOCOUPLE 网址: 销售热线:0550-7539918 隔爆热电偶 Explosion-proof Thermocouple 测温范围及允差 Measuring range Tolerance 防爆分组形式 Indication of Explosion-proof Function □ Ⅱ □ T □ 温度组别:T1-T6 Temperature Group:T1-T6 隔爆等级:A、B、C Explosion-proof Class:A、B、C 工厂用电气设备 Electric Equipment for Plant d:隔爆型 Explosion Separation Type ia:本质完全型 Intrinsic Type 电气设备类别 Electric Equipment Category Ⅰ类——煤矿井下用电气设备 Ⅰ- Electric Equipment for Coal Mine Well Ⅱ类——工厂用电气设备 Ⅱ- Electric Equipment for Plant 隔爆等级 Explosion-proof Class 隔爆热电偶的防爆等级按其使用爆炸性气体混 It is divided into grade A、Band C according to maximum test 合物最大试验安全间隙分为A、B、C三级。 safety gap in explosive gas compound. 温度组别 Temperature Group 隔爆热电偶的温度组别按其外露部分允许最高 It includes T1-T6 according to the maximum 面温度分为T1-T6 temperature of open part. 防爆级别：Explosion-proof Class EXd II□T□ EXia II□T□ 防护等级：Protection Class IP65 接线盒形式 Junction Box EXd II□T□ EXia II□T□ 型号命名方法 Type Naming Method 连接头 Straight Connector 运输与贮存 热电偶及其附件在安装前,必须贮存在不受震动和碰撞的地方。最合适的贮存场所条件为环境温度10-35℃，相对湿度不大于80%，周围空气中不应含有可能使仪表零件腐蚀的介质。 热电阻在长距离运输过程中应仔细的包装好。 Storage and transportation Before fixing,the thernmocouple and its accesscries should be stored away from range shock .the suitable conditions for storage areas follows:temp form 10℃to 35℃ relative humidity less than 80%;awayfrom the corrosive circumstances. During long-distance transportation,the thermcouple should be wellpackaged.