燃气锅炉+离心式制冷机组机房设计说明书讲稿.docVIP

沈阳市某综合楼冷热源机房设计 摘 要 本设计为市某综合楼空调冷热源设计和冷热源自控设计。夏季提供7水全年为洗浴中心提供0℃卫生热水。本设计采用台，夏季根据冷负荷和进行变流量运行调节；冬季根据热负荷和进行变流量运行调节。空调冷热源；机组；自控；变流量The design includes the cooling and heating source for air-conditioning system and automation system of a complex building in Qingdao. The gross floor area is about 127600m2, There arc nineteen floors and one floor underground. The cold duty is 2467kW and the hot duty is 4800 KW . TO: choose 3screw water-cooled refrigeration unit,and the models YKAAAAP45CJF. Their maximal burning of natural gas arc 1230kW. this design uses two water-cooled refrigeration unit as cold and heat source, the summer and 7 / 12 ℃ cooling water; winter months when the plate heat exchanger unit for providing 50/60 ℃ hot water air conditioning systems. 50℃ bathing water is provided directly by three vacuum hot water units around the whole year. In order to raise the watcrpowcr stability, making the even distribution of volume of flow, the system uses Make-up water pump to supply water and the pressure was stabilized.The second part of the project is automation system design for the substation. The automation system adopts the advanced variable flow technologies. The flow rate will be changed according to the summer cooling load and parameters of supply and return water. In winter, the flow rate will be changed according to the heat load and parameters of supply and return water. They use fuzzy control theories. The automation design still includes other usual functions such as scanning, alarming and controlling for the system. the air-condition room as well as refrigerator house drawing. The designing make the environment of indoor improved. Has achieved the design requirement. Key Words: Cooling and heating source, refrigerating unit, Half the volume heat exchanger, heat exchanger, hot-water boiler, Automation, Variable fluid control.摘 要 I Abstract II 1.工程概况及设计原始资料、设计依据 5 1.1 工程概况 设计原始资料及设计依据 5 2．空调系统概述 6 2.1气象参数 6 2.2室内设计参数： 6 2.4空调系统划分 7 3．空调负荷及