How to configure lan-to-lan tunnels between a main office and two remote offices.docVIP

下载本文档

4
0
约 15页
2017-02-13 发布于河南
举报
版权申诉

How to configure lan-to-lan tunnels between a main office and two remote offices.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

Configure lan-to-lan tunnels between a main office and two remote offices (sometimes called Hub and Spoke). This guide shows how to configure tunnels between three firewalls. First create one tunnel from firewall A to firewall B and then a second tunnel from firewall A to firewall C. Users behind firewall B should be able to reach resources behind firewall C (and the other way around). 1. Firewall A - Addresses Go to Objects - Address book - InterfaceAddresses. Edit the following items: Change lan_ip to 192.168.3.1 Change lannet to 192.168.3.0/24 Change wan1_ip to 192.168.110.5 Change wan1net to 192.168.110.0/24 Go to Objects - Address book. Add a new Address Folder called RemoteHosts. In the new folder, add a new IP address: Name: fwB-net IP Address: 192.168.1.0/24 Click Ok Add a new IP address: Name: fwB IP Address: 192.168.110.1 Click Ok Add a new IP address: Name: fwC-net IP Address: 192.168.2.0/24 Click Ok Add a new IP address: Name: fwC-remotegw IP Address: 192.168.110.3 Click Ok Add a new IP4 Group: Name: tunnelAB-localnet Add lannet and fwC-net to the Group members Click Ok Add a new IP4 Group: Name: tunnelAC-localnet Add lannet and fwB-net to the Group members Click Ok 2. Firewall A – Pre-shared keys Go to Objects - Authentication Objects. Add a new Pre-Shared Key. General: Name: fwABC-psk Shared Secret: Select Passphrase and enter a shared secret. Click Ok. 3. Firewall A – IPsec tunnel interface Go to Interfaces - IPsec. Add a new IPsec Tunnel. In the General tab: General: Name: ipsectunnelAB Local Network: tunnelAB-localnet Remote Network: fwB-net Remote Endpoint: fwB Encapsulation Mode: Tunnel Algorithms: IKE Algorithms: High IKE Life Time: 28800 IPsec Algorithms: High IPsec Life Time: 3600 IPsec Life Time: 0 In the Authentication tab: Authentication: Enable Pre-Shared Key and select fwABC-psk from the dropdown list. Click Ok. Add a new IPsec Tunnel. In the General tab: General: Name: ipsectunnelAC Local Network: tunnelAC-localnet Remote Network: f