usingbornosoftaccentinadifferentlanguageos.docVIP

Using BornoSoft Accent in a different language OSAdding English Keyboard to the active Keyboard list BornoSoft Accent (previous name: BornoSoft Bangla2000) has been designed to work with English key input using an English Keyboard. If your keyboard is in any language other than English, you cannot get the desired Bangla characters following certain keystrokes. But there is a solution to this problem. If your computer’s primary language is not English, i.e., you are using a French, Japanese or any other system, you can set up the English language keyboard to run along with your primary setting. Your computer is equipped with a number of different keyboards. Instructions on adding additional keyboards are as follows. Windows XP and 2000 1. Open your Control Panel and open the item (file) named Regional and Language Options. Figure 1: Control Panel. This image may look different from your computer if the view option is different. You should be able to locate the item in any view.  2. Click on the Language Tab [1] on the window that will appear. (See Figure 2) 3. Click the Details button [2] on the Language Tab window. (Figure 2) 4. Click the Add button [3] on the window that will appear. (Figure 2) 5. Click the Language List [4] and select English (United States) from the list. This will automatically select the US keyboard. (Figure 2) 6. Click OK [6]. (Figure 2) Figure 2: Regional and Language settings. Multiple steps (2 to 6) are shown in image. [Continued on next page]English keyboard will be added to the Keyboard list (Figure 3). Figure 3. Active keyboards list and Language Bar set up. 7. Click the Language Bar button [7] and check the checkbox [8] in the window that will appear. Click OK [9]. This will show the Language Bar on the desktop for the convenience of switching between keyboards. Switching between keyboards. You will see the Language Bar on the desktop. Click on it and select the Engl