Application for Part Permit to Fly【DOC精选】.docVIP

Contact the relevant National Aviation Authority for further details. Application for Part 21 Permit to Fly 1. Applicant: [Name of applicant] 2. Aircraft nationality and identification marks: 3. Aircraft owner: 4. Aircraft manufacturer/type 5. Serial number 6. Purpose of flight 7. Expected target date(s) for the flight(s) and duration 8. Aircraft configuration as relevant for the permit to fly 8.1 The above aircraft for which a permit to fly is requested is defined in [add reference to the document(s) identifying the configuration of the aircraft.] 8.2 The aircraft is in the following situation related to its maintenance schedule: [Describe status] 9. Approval of flight conditions [if not available at the time of application, indicate reference of request for approval] 10. Date 11. Name and signature [Authorised signatory] EASA Form 21 ADDITIONAL INSTRUCTIONS Box 6: Use the following terminology and add any additional information for accurate description of the purpose, e.g. place, itinerary…. (1) Development: - testing of new aircraft or modifications - testing of new concepts of airframe, engine propeller and equipment; - testing of new operating techniques; (2) Showing compliance with regulations or certification specifications: - certification flight testing for type certification, supplemental type certificates, changes to type certificates or European Technical Standard Order authorisation; (3) Design organisations or production organisations crew training: - Flights for training of crew that will perform design or production flight testing before the design approval and Certificate of Airworthiness (C of A) can be issued. (4) Production flight testing of new production aircraft: - For establishing conformity with the approved design, typically this would be the same program for a number of similar aircraft; (5) Flying aircraft under production between production facilities: - green aircraft ferry for follow on fin