原创力文档- 1、本文档共6页，可阅读全部内容。
- 2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
- 3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
查看更多
Cap 59L reg 9 Construction, maintenance, etc., of guards二
摘要：本文主要介绍了Cap 59L reg 9 Construction, maintenance, etc., of guards的主要内容。
(4) The speed of every air driven spindle on which an abrasive wheel is mounted shall be controlled by a governor or other device so that the speed of the spindle does not at any time exceed the maximum working speed specified for that spindle in accordance with paragraph (1).
(5) Every governor and other device used for controlling the speed of an air driven spindle on which an abrasive wheel is mounted shall be properly maintained.
Cap 59L reg 7 Mounting
(1) Every abrasive wheel shall be properly mounted.
(2) An abrasive wheel shall not be mounted except by a person who-
(a) has been appointed in writing for that purpose by the proprietor of an industrial undertaking; and
(b) is, by reason of training and practical experience, competent to perform that operation.
Cap 59L reg 8 Provision of guards
(1) Except as provided in paragraph (2), a guard shall be provided and kept in position at every abrasive wheel in motion.
(2) Paragraph (1) shall not apply to an abrasive wheel where, by reason of the work being done, or of the work which is ordinarily done (or, in the case of a new wheel, is intended ordinarily to be done), or the nature of the wheel, the use of a guard is impracticable.
Cap 59L reg 9 Construction, maintenance, etc., of guards
Every guard provided in pursuance of these regulations shall-
(a) so far as is reasonably practicable, be of such design and construction as to contain every part of the abrasive wheel in the event of fracture of the abrasive wheel or any part thereof occurring while the abrasive wheel is in motion;
(b) be properly maintained and so secured as to prevent its displacement in the event of fracture; and
(c) enclose the whole of the abrasive wheel except such part as is necessarily exposed for the purpose of work being done at that abrasive wheel or, where a guard which is not adjustable is used, for the
文档评论（0）