Mechanical Systems and Signal Processing【DOC精选】.doc

In order to realize preliminary evaluation of process design, a virtual processing algorithm for the intelligent stamping process was proposed. Using this algorithm, all phases, process design, process control and system implementation, can be performed virtually. To enhance the reliability of a system, a ductile fracture criterion was applied to the virtual system for fracture prediction. Through the implementation of the system, it was confirmed that all the process phases are virtually performed in order, and finally, cup height improvement was accomplished. This analytical result indicates that the virtual processing algorithm is highly useful for system evaluation during the design process before constructing the real system. Engineers can save time and cost savings considerable by using this virtual processing system. Article Outline 1. Introduction 2. Virtual processing system 2.1. System architecture 2.2. System implementation procedure 3. Ductile fracture criterion 4. System implementation 4.1. Constant BHF deep-drawing operation 4.2. Fuzzy adaptive controlled variable BHF deep-drawing operation 5. Results and discussion 6. Concluding remarks References Purchase $ 37.95 635 Mechatronic design and injection speed control of an ultra high-speed plastic injection molding machine??Original Research ArticleMechatronics, Volume 19, Issue 2, March 2009, Pages 147-155Ching-Chih Tsai, Shih-Min Hsieh, Huai-En Kao ?Close preview??|?? Related articles??|??Related reference work articles???? AbstractAbstract | Figures/TablesFigures/Tables | ReferencesReferences Abstract This paper presents pragmatic techniques for mechatronic design and injection speed control of an ultra high-speed plastic injection molding machine. Practical rules are proposed to select specifications of key mechatronic components in the hydraulic servo system, in order to efficiently construct an industry-level machine. With reasonable assumptions, a mathematical model of the injecti