Linux串口通讯.pptVIP

设置校验位（2/2） 偶效验(Even) 7位 Option.c_cflag = ~PARENB; Option.c_cflag |= ~PARODD; Option.c_cflag = ~CSTOPB; Option.c_cflag = ~CSIZE; Option.c_cflag |= CS7; Space效验 7位 Option.c_cflag = ~PARENB; Option.c_cflag = ~CSTOPB; Option.c_cflag = ~CSIZE; Option.c_cflag |= CS8; 设置硬件流控制 If the CNEW_RTSCTS or CRTSCTS constants are defined on your system then hardware flow control is probably supported. Do the following to enable hardware flow control: options.c_cflag |= CNEW_RTSCTS; /* Also called CRTSCTS */ Similarly, to disable hardware flow control: options.c_cflag = ~CNEW_RTSCTS; 设置软件流控制 Software flow control is enabled using the IXON, IXOFF , and IXANY constants: options.c_iflag |= (IXON | IXOFF | IXANY); To disable software flow control simply mask those bits: options.c_iflag = ~(IXON | IXOFF | IXANY); The XON (start data) and XOFF (stop data) characters are defined in the c_cc array described below 设置停止位 1位停止位 options.c_cflag = ~CSTOPB; 2位停止位 options.c_cflag |= CSTOPB; Local Options (for c_lflag) Constant Description ISIG Enable SIGINTR, SIGSUSP, SIGDSUSP, and SIGQUIT signals ICANON Enable canonical input (else raw) XCASE Map uppercase \lowercase (obsolete) ECHO Enable echoing of input characters ECHOE Echo erase character as BS-SP-BS ECHOK Echo NL after kill character ECHONL Echo NL NOFLSH Disable flushing of input buffers after interrupt or quit characters IEXTEN Enable extended functions ECHOCTL Echo control characters as ^char and delete as ~? ECHOPRT Echo erased character as character erased ECHOKE BS-SP-BS entire line on line kill FLUSHO Output being flushed PENDIN Retype pending input at next read or input char TOSTOP Send SIGTTOU for background output 通讯模式 如果只是串口传输数据，而不需要串口来处理，那么使用原始模式(Raw Mode)方式来通讯，设置方式如下： options.c_lflag = ~(ICANON | ECHO | ECHOE | ISIG); /*Input*/ 否则，选择经典模式 options.c_lflag |= (ICANON | ECHO | ECHOE); Input Option