给排水设计常用英文.docVIP

给排水设计常用英文 1 All pipes shall be of socket rubber joint connection. 所有管子连接采用承插胶圈连接。 2 The flanged connection shall not be used as general. 一般不使用法兰连接。 3 All pipe and pipe fittings shall be fusion weld in accordance with manufacture’ instructions. 所有管子及管件应采用热熔焊并按制造厂的意见执行。 fusion 熔化，熔接 weld 焊接 in accordance with 与……一致，依照 4 The socket bore shall match pipe O.D. 承插孔尺寸与管外径相配。 5 Each threaded valve shall be equipped with two converted adapters(outer screw/fusion weld). 每个螺纹阀门与管子连接时配两个外螺纹/热熔转换接头。 6 copper electroplated chrome 铜 电镀 铬合金 7 All pipe and pipe fitting