Canon镜头防护盒注射模具设计【毕业论文+CAD图纸全套】.doc

摘 要 本设计说明书简要说明了Canon镜头防护盒注射模具的设计过程。首先从该塑件所选用的材料聚碳酸酯PC、塑件的精度要求、生产批量等几个角度进行分析，确定模具的成型方案。具体内容包括注塑机的选择、型腔数目的确定、塑件的排位、分型面的确定、模具强度、成型零件的设计、常用的结构件的设计、侧向分型抽芯机构的设计、脱模机构、浇注系统、模具温度及冷却系统的设计等，并对在设计中选用的一些常用的标准件进行了说明。其中主要针对模具的型芯、型腔的设计进行了认真的分析和说明，为提高模具的设计水平提供了有力的理论依据。型芯的计算按制品的平均收缩率计算，同时还对一些特殊的部位的尺寸进行必要的工艺分析，还有一部分尺寸则根据实际生产过程中得到的一些经验的数据确定。 关键词：PC；脱模机构；冷却系统；浇注系统；模具设计；注塑模 Abstract The design specification, a brief description of the design process of Canon lens protective box injection mold. First carries on the analysis from the plastic parts of the selected material polycarbonate PC, the precision of the plastic parts, several aspects of mass production requirements, determine the forming scheme of the mould. The concrete content includes the choice of injection molding machine, the number of cavity, the determination of plastic parts in qualifying, type determination, strength of die, molding parts design, commonly used structural parts design, side parting and core pulling mechanism design, demoulding mechanism, gating system, the mold temperature and the cooling system design, and some commonly used criteria used in the design of parts are described. The design for the core, the mold cavity is analyzed and illustrated serious, provides strong theoretical basis for improving the design level of the mold. The calculation of core is calculated by average shrinkage products rate, but also for some special parts of the size necessary analysis technology, and part size is according to some experience obtained in actual production process data to determine. Keywords: PC; demoulding mechanism; cooling system; pouring system; mold design; mold 目 录 摘 要 I 目 录 I 1 绪论 1 1.1塑料成型与注塑模具 1 1.2国内外相关发展状况 2 1.2.1国内发展状况 2 1.2.2国外发展状况 3 1.2.3中国与国外先进技术的差距 3 1.3塑料模具发展走势 3 2 塑件材料分析与方案论证 5 2.1塑件的工艺分析 5 2.1.1塑件的材料 5 2.1.2聚碳酸酯的基本特性 5 2.1.3聚碳酸酯的成型特点 5 2.1.4聚碳酸酯的主要用途 5 2.1.5 聚碳酸酯的注射成型工艺参数 5 2.2塑件的成型工艺 6 2.2.1注射成型的原理 6 2.2.2注射成型的工艺过程 7 2.2.3注射成型工艺参数 8 2.2注塑模的机构组成 9 2.3方案论证 9 3 注射成型机的选择 11 3.1