土木工程专业英语作者陈瑛4.1-1FlexuralBehaviorofReinforceConcreteBeam1课案.pptVIP

4.1. Flexural Behavior of Reinforce Concrete BeamRC受弯构件正截面性能 Plain concrete beam are ineffective as flexural members because the tensile strength in bending is a small fraction of the compressive strength. As a consequence, such beams fail on the tension side at low loads long before the strength of the concrete on the compression has been fully utilized. Reinforced concrete beam :steel reinforcing bars are placed on the tension side as close to the extreme tension fiber. In such a reinforced concrete beam, the tension caused by the bending moment is chiefly resisted by steel reinforcemen