D2D虚拟带库安装使用指南讲述.docVIP

HP StorageWorks D2D Backup System nlHP D2D4004 Using the console to edit the HP D2D Backup System network (IPv4 and IPv6) To connect the system console 1. Connect the monitor cable to the VGA port on the rear of the unit. 2. Connect the keyboard cable to the PS/2 ports on the rear of the unit. Do not connect anything to the USB ports. 3. Power on the HP D2D and allow it to boot up until the console screen is displayed (see example below). Select the Network... option from the left-hand Menu. 4. Locate the IP address for the port(s) and make a note of it. 通过console设置的IP登录进管理页面 htt