IUWNESLMaintaining the System.pptVIP

WLAN Maintenance and Troubleshooting Maintaining the System Controller Platform and Code Version Wireless All APs Detail Inventory Upgrade: GUI Recommended Apply vs. Save Configuration Commands Upload File show running-config show run-config Wireless All APs Detail Wireless All APs Detail (Cont.) Commands Reset to Factory Default Commands Reboot System Save And Reboot or Reboot Without Save Cisco WCS Automated Backup Cisco WCS Automated Backup (Cont.) Cisco WCS Manual Backup Cisco WCS Manual Backup (Cont.) Cisco WCS Code Upgrade Summary Controller code can be upgraded from the web interface or the CLI. The controller configuration file can be saved and uploaded to a TFTP server; it can also be copied from the CLI. The Cisco WCS database can be saved automatically from the background tasks; when you install a new version of Cisco WCS, the database is automatically saved. ? 2008 Cisco Systems, Inc. All rights reserved. IUWNE v1.0—6-* ? 2008 Cisco Systems, Inc. All rights reserved. IUWNE v1.0—6-* Commands Download file For the new code to take effect, a controller reboot is needed. When uploading or downloading configuration files, you can choose encryption. (Cisco Controller) show run? run-config running-config (Cisco Controller) show running-config 802.11a cac voice tspec-inactivity-timeout ignore 802.11a cac voice stream-size 84000 max-streams 2 802.11b cac voice tspec-inactivity-timeout ignore 802.11b cac voice stream-size 84000 max-streams 2 advanced 802.11a receiver pico-cell-V2 rx_sense_thrld 0 0 0 advanced 802.11a receiver pico-cell-V2 cca_sense_thrld 0 0 0 advanced 802.11a receiver pico-cell-V2 sta_tx_pwr 0 0 0 advanced 802.11b tx-power-control-thresh -65 advanced location expiry tags 1200 advanced location expiry client 150 advanced location expiry calibrating-client 30 advanced location expiry rogue-aps 1200 Cisco Public Safety is not allowed to set in this domain country GB interface create vlan80 80 interface address manag