关于请协助通知企业进行排查并做好美国对华无螺栓.doc

附件1 涉案产品描述 其英文描述如下： “The scope of this petition covers boltless steel shelving units prepackaged for sale, with or without decks (boltless steel shelving). The term prepackaged for sale means that the vertical supports (i.e., posts) and horizontal supports (i.e., beams and braces) necessary to assemble a completed shelving unit (withor without decks) are packaged together for ultimate purchase by the end-user. The scope also includes add-on kits that allow the end-user to add an extension shelving unit onto an existing boltless steel shelving unit such that the extension and the original unit will share a set of posts. The term boltless refers to steel shelving in which the vertical and horizontal supports forming the frame are assembled primarily without the use of nuts and bolts or screws. The vertical and horizontal support members for boltless steel shelving are typically assembled by fitting a rivet, punched or cut tab or other similar connector on one support into a hole, slot or similar receptacle on another support. The supports lock together to form the frame for the shelving unit. The incidental use of nuts and bolts or screws to add accessories, wall anchors, tie-bars or shelf supports does not remove the product from scope. Boltless steel shelving units may also come packaged as partially assembled, such as when two upright supports are welded together with front-to-back supports, or are otherwise connected, to form an end unit for the frame. The boltless steel shelving covered by this Petition may be commonly described as rivet shelving, welded frame shelving, slot and tab shelving, and punched rivet (quasi-rivet) shelving as well as by other trade names. The scope includes all boltless steel shelving meeting the description above, regardless of (1) vertical support or post type (including but not limited to open post, closed post and tubing); (2) horizontal support or beam/brace profile (including but not limited to Z-beam, C-beam, L-beam, step beam