产品使用说明书HOTSPOTII.pdfVIP

HOTSPOT II 产品使用说明书 产品使用说明书 HOTSPOT II 第 1 页 / 共 12 页 HOTSPOT II 产品使用说明书 WARNINGS 警告 （Concerning Hot Spot II Use Repair ） （HotSpot II 的使用和维修） The Hot Spot II is a pulse high energy welding unit and can generate HotSpot II 是脉冲高能焊接单元，它能产生电 voltages and hot particles that are dangerous to the operator. Care should 压和热飞溅颗粒物，这些对操作者是有危险的。 be taken to avoid coming into direct contact with the uninsulated portions 在使用该设备时要格外小心，拿钳子时不要接触 of the holding pliers or wire being welded while using this tool. Particular 非绝缘的部分或被焊接的线，并且要采取特别措 steps should be taken to avoid damage caused by sparks and sprays of 施来防止在焊接操作时熔融金属火花溅到身上。 molten metal produced by welding operations. The operator can be 操作人员可以使用塑料防护物来保护自己，使自 protected by a plastic shield from the hot particles. In no case should the 己免受热颗粒造成的伤害。操作人员绝对不能在 unit be used without suitable eye protection such as the shaded goggles 不戴合适的防护镜的情况下进行操作（焊接机已 provided with the welder. Avoid flammable clothing and do not operate in 配护目镜）。不要穿易燃的衣服，不要在有易燃或 areas containing inflammable or explosive materials. Very high currents 易爆材料的地方操作。该设备能产生强电流，应 are produced by this device so care should be exercised using the unit in 该小心不要在对脉冲比较敏感的地方使用该设 any electrical environments sensitive to such pulses. 备。 Internal power