氢气瓶高压阀门TV-2XX-seriestankvalvemanual答案.doc

350 BAR INTERNAL SOLENOID TANK VALVE REFERENCE MANUAL TV-2XX VALVES Specifically designed for 350 bar Hydrogen, the IMPCO GFI solenoid operated internal tank valve provides enhanced storage system safety. Available in both 12 VDC and 24 VDC models. An integrated temperature and pressure activated relief device ensures total system safety by ensuring tank protection. Note: Not all models exactly as shown.  CONFIDENTIALITY The information contained in this document is confidential and proprietary to IMPCO Technologies Control Systems. This information cannot be disclosed to other parties without written authorization from IMPCO Technologies. This document is intended only for customers engaged in a current confidentiality agreement with IMPCO Technologies. DISCLAIMER Although every effort has been made to provide complete and accurate information, IMPCO Technologies cannot guarantee performance based solely on this document. Table of Contents  PHYSICAL DIMENSIONS 2 GAS SCHEMATIC AND SPECIFICATIONS 4 ELECTRICAL SCHEMATIC AND SPECIFICATIONS 6 TEMERATURE SENSOR 7 OPTIONAL CONNECTOR AND MATING CONNECTOR 8 PRESSURE RELIEF DEVICE (PRD) 9 MANUAL LOCKDOWN 9 DIAGNOSTICS 10 SERVIC CHECKS 14 SPECIAL TOOLS 15 APPLICATION CONSIDERATIONS 16  PHYSICAL DIMENSIONS The internal tank valve is intended to fit into a standard 2-12 UN tank thread, with only 2” [50.8mm] protruding beyond the neck of the tank. To keep space requirements to a minimum, all connections are radial to the tank neck. Even the manual lockdown can be accessed from the side. Main materials in gas contact: - 6061-T6 aluminum - Glass -18-8 Stainless steel - 430F and ‘FR Stainless steel - Nitrile - Dupont Vespel - Delrin - Copper wire, insulation - Heatshrink tubing Weight (w/o sensors): 1.925 lbs 0.87 kg Tank volume displaced: 6.4cu. in. 0.105 L Inlet/Outlet ports: 9/16-18 SAE J1926/1, -6 O-ring PRD Port 7/16-20 UNF SAE J1926/1, -6 O-ring Tank thread: 2-12 UN  M