0kV架空送电线路设计稿毕业设计稿说明书.docxVIP

毕业设计说明书 110kV格青架空送电线路设计学生姓名：班级学号：院、系、部：专 业：电气工程及其自动化（输配电工程）指导教师：合作指导教师： 2013年6月 南 京Undergraduate Design(Thesis)The Design of 110kV GEQINGOverhead Power Transmission LineBYSupervised by School of Electric Power Engineering Nanjing Institute of TechnologyJune 2013摘要根据江苏省电力公司电力系统规划设计，拟新建一条110kV格青架空送电线路。本设计由已知的气象条件，地理情况，材料参数等，对线路进行设计。设计包括说明书、计算书、杆塔与金具示意图三部分。主要内容有：导线、避雷线的应力、弧垂计算；杆塔型式和金具的选择；选线和定位；转角耐张杆荷载计算；基础设计；导线的防振设计。设计中简要的说明了设计理论和计算公式，列出了详细的设计内容和要求，注意事项，给出了相关的设计图纸。关键词 110kV，架空送电线路，设计AbstractAccording to the jiangsu province power company power system planning and design, proposed the construction of a new 110 kv grid GEQING overhead transmission lines. This design by known meteorological conditions, geographical conditions, material parameters, etc., to design the circuit.Design including specifications, calculations, tower and hardware diagram of three parts. Stress of the main contents are: wire, ground wire, HuChui calculation; Tower type and the choice of hardware; Line selection and positioning; Angle of tension rod load calculation; Foundation design; Vibration control design of the wire. Briefly illustrates the design theory and calculation in the design of formula, lists the details of the design content and requirements, matters needing attention, and gives the related design drawings.Key Words110kV, overhead power transmission line, design目录摘要IAbstractII目录11 绪论12 说明书22.1 工程概况22.2临界档距82.3地线选择102.4杆塔形式选择132.5 绝缘子及金具选择132.6模板曲线与室内定位172.7导线防振设计182.8绝缘子的校核202.9 塔头尺寸校验212.10杆塔的荷载计算222.11杆塔基础的设计243 计算书263.1 导线、逼雷线的应力弧垂计算263.2地线的应力弧垂计算373.3绝缘子的选择413.4排杆定位443.5杆塔头部尺寸校验及定位校验473.6耐张杆荷载计算513.7塔腿主材内力计算533.8塔腿斜材内力计算533.9杆塔基础作用力：543.10导线、避雷线的防振设计554 结论64谢辞65参考文献66附录1：外文翻译67A1.1 Power Supply and Distribution System（原文）67A1.2 供配电系统（译文）72附录2: 附图75A 2.1 杆塔荷载图75A 2.2 导线应力弧垂曲线76A2.3避雷线应力弧垂曲线图77A2.4绝缘子金具组装图78A2.5单导线单联悬垂串79A2.6直线杆杆型图80A 2.7 耐张杆杆型图81附录三平断面图821 绪论我国目前已形成华北、东北、华东、华中、西北和南方电网共6个跨省区电网以及海南、新疆和西藏3个独立省网，500千伏线路已成为各大电力系统的骨架和跨省、跨地区的联络