基于CAN总线的蓄电池化成监控系统设计稿毕业专业论文.docxVIP

工程大学本科生毕业论文 基于CAN总线的蓄电池化成监控系统设计 摘 要 ARM微处理器遍及工业控制、电子产品、网络通信等各个领域，ARM技术正逐步进入并改变着我们的生活。在32位微处理器领域里， ARM Cortex-M3处理器性能尤为突出。基于ARM Cortex-M3内核的STMF103系列微处理器具有功耗少、成本低、性能高的特点，而且有众多的开发编译平台支持，其中便有一款优秀的软件——Kiel uVision4。 CAN总线技术被广泛地应用在工业自动化、汽车、船舶等领域，是能有效的支持分布式控制和实时控制的串行通信网络，可实现各设备间稳定并准确的数据传输，为数据通信提供了强有力的支持。 蓄电池作为一种稳定的化学电源，其在工业领域及人们的日常生活中发挥着不可替代的作用。蓄电池的化成作为蓄电池制作过程中的关键一环，直接影响着蓄电池质量的好坏。 本课题正是基于CAN总线技术，采用STM32F103VET6作为系统主控制器，设计硬件电路，使用Kiel uVision4软件作为STM32微控制器的开发编译平台，并通过Visual Basic进行上位机软件的编写。主要通过编译程序输出不同占空比的PWM波，以实现对蓄电池化成过程的充放电控制。 关键词：ARM；STMF103；CAN总线；Kiel uVision；Visual Basic；PWM Abstract ARM Microprocessor throughout industrial control, electronic products, network communications and other fields, ARM technology is gradually entering and changing our lives. In the field of 32-bit microprocessor, ARM Cortex-M3 processor performance is particularly prominent. Based on ARM Cortex-M3 core STMF103 series microprocessor with low power consumption, low cost, high-performance features, and there are numerous compiler development platform support, which will have an excellent software - Kiel uVision4. CAN bus technology has been widely used in industrial automation, automotive, shipbuilding and other fields, is able to effectively support the distributed control and real-time control of the serial communications network, enabling the devices to stabilize and accurate data transmission for data communications to provide strong support. Battery as a stable chemical power, and its industrial sector and peoples daily life and play an irreplaceable role. Battery into the battery production process as a key ring, a direct impact on the quality of the battery is good or bad. This topic is based on CAN bus technology, STM32F103VET6 as the system master controller, hardware circuit design, the use of Kiel uVision4 Software as STM32 microcontroller compiler development platform, and through Visual Basic for PC software is written. Mainly through the compiler output with PWM wave, in o