7700ACO2-SLKE,7700ACO2-SLKE-HD.PDFVIP

7700ACO2-SLKE, 7700ACO2-SLKE-HD Dual HD/SD-SDI Smart Automatic Changeover with Integrated StreamLINK ? Encoder The 7700ACO2-SLKE-HD is the industry’s leading smart automatic changeover (ACO) for high definition 1.5Gb/s or standard definition 270Mb/s serial digital video signals. The 7700ACO2-SLKE-HD incorporates Evertz? essential audio and video monitoring which is used to drive the real time automatic switch logic processor. Common parameters include user configurable loss of signal, freeze, and black detect. This device provides: ? Dual processing paths on a single module ? Smart HD/SD-SDI automatic protection switching of both paths ? Video and Audio Proc Amp Control ? Built in Trouble Slide per ACO ? H.264 encode of either all four inputs in a quad-split, or any one input, built off Evertz? award winning StreamLINK? engine ? Optional IntelliGain? Audio Loudness Processing with Dynamic Audio Range Control These modules have dual independent processing paths providing both high density and availability of any HD-SDI or SD-SDI video inputs signals (program and back-up). These modules provides a passive loop-thru of both primary and backup input video sources and provides dual safe program outputs. The 7700ACO2-SLKE-HD can optionally be ordered with Evertz? patented IntelliGain? Audio and Loudness Processor. The IntelliGain? processor is designed to normalize perceived differences in audio loudness in real time for any HD/SD-SDI signal with embedded audio. This module will internally de-embed the audio signals, regulate the signal level based on a used defined target loudness level, then re-embed the corrected audio signals back into the video output. VistaLINK? enables control and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage the module status monitoring and configuration from SNMP - enabled control systems such as Evertz VistaLINK? PRO locally or remotely. The 7700ACO2-SLKE-HD occupies two card slot