SYSTEM6STAGEPREHEATERSYSTEM6.PDFVIP

6 STAGE PREHEATER SYSTEM 6 STAGE PREHEATER SYSTEM 6 STAGE PREHEATER SYSTEM 6 STAGE PREHEATER SYSTEM 6 STAGE PREHEATER SYSTEM 6 STAGE PREHEATER SYSTEM 6 STAGE PREHEATER SYSTEM 6 STAGE PREHEATER SYSTEM 6 STAGE 六级预热器系统 6 STAGE PREHEATER SYSTEM ●可适应700~12000t/d的窑系统生产规模 ●预热器系统换热效率高、阻力损失低 ●分解炉能适应低热值煤及替代燃料等多种燃料 ●入窑生料分解率稳定 ●NOx排放浓度低 ●Available for cement production line with capacity of 700~12000 t/d clinker; ●High heat exchange rate and low pressure loss; ●Adaptable for low calorific valve coal and alternative fuel; ●Stable decomposition rate of kiln feed; ●Low NOx emission 主要技术优势 Main technical advantage 天津水泥工业设计研究院有限公司 Tianjin Cement Industry Design Research Institute Co.,Ltd. Precalcining technology is the core technology of clinker burning system. Up to now, we have provided over 500 sets of preheater system, so as to ensure our technology in leading position of Chinese and International market. The function of preheater system is to preheat the raw meal and to decompose most of carbonate. Raw meal after calciner will be burnt in kiln. By such reason, the stages of precalcining system and its performance plays a very important impact to heat consumption of burning system and outlet pressure of preheater system. When integrated moisture of raw material is lower, the foreign cement producers prefer to use 6-stage preheater in order to minimize the heat consumption of burning system. 6-stage preheater is suitable for raw material with moderate moisture, especially for the region lack of energy and water resources. 概述 技术特点 General Technical characteristics 1 2 预热预分解技术是预分解烧成工艺的核心技术。我公 司目前已经提供了五百台套以上窑尾预热器系统，确保了 在新型干法水泥生产技术领域处于国内外领先地位。 窑尾预热器系统的作用是对生料进行预热，并使大部 分碳酸盐分解，出分解炉生料经最下级预热器分离后入窑 煅烧。因此预分解系统的级数及性能对烧成系统热耗和预 热器系统出口压力有很大影响。当原料综合水分较低时， 国外水泥企业普遍倾向于采用六级预热器系统以降低烧成 系统热耗。六级预热器系统适合于原料水分不是很高的工 程，尤其对能源短缺和水资源短缺的地区是很好的选择。 我公司借助于现代流体力学、燃料燃烧学和气固两相流原理，通过对分解炉和旋风筒单体 设备原理分析，提出对单体设备结构的构想，在此基础上进行了大量的冷热态试验研究及计 算机仿真，开发出结构简单、适应于不同原燃料的三喷腾型TTF高效分解炉和结构简单的大蜗 壳旋风筒、悬挂分片式的耐热钢内筒、滚动轴承结