总控专业术语概述.docVIP

一、自控专业用词汇 Terms per process control流量 Flow物位 Level液位 Liquid level温度 Temperature压力 Pressure分析 Analysis指示 Indicating记录 Recording传递 Transmitting控制 Controlling调节 Regulating信号 Signaling联锁 Interlocking积算 Integrating遥控 Remote controlling信号报警 Alarming声光信号 Acoustic and light signals多点记录 Multipoint recording多点指示 Multipoint indicating集中检测 Controlized measurement人工操作 Manual operation测量范围 Measuring range分度号 Graduation输入 Input输出 Output刻度 Scale等分刻度 Equally divided scale等百分比 Equal percent精度(指仪表) Precision精度(指测量) Accuracy流量特性 Flow character(istic)线性(调节阀) Linear对数(调节阀) Logarithmic方根(指记录仪) Square root力矩(指执行器) Moment公称力矩(指执行器) Nominal moment行程(指执行器) Stroke常温 Ambient temperature常压 Atm. Pressure微分 Derivative积分 Integral上限值 Upper limit下限值 Lower limit取压点 Pressure tapping point检测点 Measured point取样点 Sampling point正环室(指孔板) Plus carrier-ring负环室(指孔板) Minus carrier-ring均压环(指孔板) Pressure-equalizing ring伴热管线 Tracing pipe脉冲(导压)管线 Impulse pipe负迁移 Negative suppression正迁移 Positive suppression保护管(指热电阻,热电偶) Sheath测温(保护)套(指设备带的) Thermowell插入深度 Insertion length(浸入深度) (Immersion length)仪表盘开孔 Panel-board cut-out一次仪表 Primary instrument二次仪表 Secondary instrument现场(就地)安装 Field (local) mounting盘装 Panel mounting架装 Rack mounting柱上安装 Pole mounting侧面安装 Side mounting盘面安装 Surface mounting壁装 Wall mounting滞后 Lag易接近性 Accessibility可见性 Visibility(安装)位置 (Mounting) location间隙 Clearance接管 Piping接线 Wiring注字(指铭牌) Inscription二、温度测量仪表 Temperature measuring instrument工业双金属温度计 Industrial bimetallic thermometer玻璃水银温度计 Mercury-in-glass thermometer电接点压力温度计 Manometric thermometer with electric contacts光学温度计 Optical pyrometer表面热电偶 Surface thermocouple镍铬-镍硅热电偶 Chromel-silicel thermocouple镍铬-镍铝热电偶 Chromel-alumel thermocouple铂铑-铂热电偶 Platinum-rhodium platinum thermocouple固定螺纹(普通式) 镍铬-镍铝热电偶Chromel-alumel thermocouple with fixed threaded bushing固定螺纹(防溅式) 镍铬-镍铝热电偶Splash