新型太陽能路灯热分析与结构设计书.docVIP

摘要 LED作为第四代照明光源已被广泛应用于显示和照明系统设备，但由于其光电转化率较低，大部分电能实际转化成了热量，所以如何提高其散热能力是大功率LED实现产业化亟待解决的关键技术之一。我国虽有多家企业开发生产 LED 城市照明路灯，但很多是用小功率LED 阵列作发光体，小功率LED 光衰强，散热问题解决了，所用LED数量要很多，实用性增强。城市照明LED路灯采用大功率LED 是发展的趋势。文章以某公司LED路灯为模型，采用EFDpro元软件对其进行参数化建模及热分析，得出了其稳态的温度场分布，分析了铝制热沉不同结构参数对其温度场的影响情况。由最终的结果可知，采用一体化压铸散热器,并在合适的范围内使散热器翅片的厚度和间距较小一些，可得到较为理想的优化结构，既能控制芯片的最高温度，又有效地减小了散热器的质量。 文章LED路灯算例得到优化的质量为原质量的33．40％。 关键词：大功率LED；热沉；热分析 ABSTRACT LED lighting source as the fourth generation has been widely applied to display and lighting system equipment, but because of its photoelectric conversion rate is low, most power actual turns into heat, so how to raise the heat capacity is high power LED realized industrialization urgently to be solved in one of the key technology. Though many enterprises in China development production LED urban lighting lamps, but many are made with little power LED lights, small power array of strong, LED light failure cooling problem solved, LED to many, used number of practical enhancement. Urban lighting LED street lamps use high power LED is development trend. Taking a company LED lamps for model using EFDpro finite element software, the parameterized modeling and thermal analysis, obtained the steady-state temperature field distribution, based on the orthogonal experiment by design, analyses the aluminum heat sink different structural parameters on the effect of temperature field. By the final result, in appropriate range make radiator fin thickness and spacing lesser, can get the ideal optimization structure, already can control chip maximum temperature, and effectively reduced the radiator quality. Article LED lamps example for the original optimized the quality of the quality of 33.40%. Keywords: high power LED Heat sink Thermal analysis 目录 第一章 绪论 1 第二章 太阳能LED路灯 3 2.1 LED的发展历程与前景 3 2.1.1 LED概述 3 2.1.2 LED照明的发展历程 3 2.1.3 LED照明的发展前景 5 2.2 太阳能路灯构成及光源 6 2.3 新型太阳能路灯的优缺点 9 2.4 发展新型LED路灯的意义 12 第三章 设计必备软件介绍 13 3.1 proe概述 13 3.1.1 proe的简介：