67C Series.pdfVIP

67C Series D 10 26 01 X 01 2 Instruction Manual Form 5469 May 2006 /regulators R 67C Series Instrument Supply Regulators Type 67CF FIlTeR RegulaToR wITh opTIonal gauge Type 67C oR 67CR RegulaToR Figure 1. Typical 67C Series Regulators W7412 W8438 Introduction Scope of Manual This manual provides instructions and parts lists for 67C Series instrument supply regulators. Instructions and parts lists for other equipment mentioned in this instruction manual, as well as for other 67 Series regulators, are found in separate manuals. product Descriptions The 67C Series direct-operated regulators are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. They are suitable for most air or gas applications. Other applications include providing reduced pressures to air chucks, air jets, and spray guns. ? The Types 67C and 67CS are the standard instrument supply regulators without a filter or internal relief. ? The Types 67CF and 67CFS are equipped with a filter for removing particles from the supply gas. ? The Types 67CR and 67CSR have an internal relief valve with a soft seat for reliable shutoff with no discernible leakage. ? The Types 67CFR and 67CFSR have a filter and internal relief valve with a soft seat for reliable shutoff with no discernible leakage. Specifications Some general 67C Series ratings and other specifications are given on page 2. A label on the spring case gives the control spring range for a given regulator as it comes from the factory. 67C Series 2 Specifications Body Size, Inlet and outlet Connection Style 1/4-inch (DN 6) NPT Maximum Inlet pressure (Body Rating)(1) all except Types 67CS and 67CSR: 250 psig (17,2 bar) Types 67CS and 67CSR: 400 psig (27,6 bar) outlet pressure Ranges See Table 1 Maximum emergency outlet pressure(1) 50 psi (3,45 bar) over outlet pressure setting accuracy Inlet Sensitivity: Less than 0.2 psig (0,0