管道熔结环氧粉末外涂层标准对比分析.pdfVIP

i鱼遂量型竺!旦墅堂兰!塑塑塑盥一 文章编号：1000—8241(2013)05—0545—05 管道熔结环氧粉末外涂层标准对比分析 潘红丽1 赵晋云1 张丰1 刘玲莉1 赵君1 杨建军2苏磊3 1．中国石油管道科技研究中心·油气管道输送安全国家工程实验室，河北廊坊065000；2．中国石油管道建设项目经理部 北京100101；3．中国石油管道公司中原输油气分公司，山东德州253020 摘要：从涂层结构、原材料指标、涂装工艺评定、表面处理及涂装要求、涂装质量检验等方面，对比分 析了国内外管道熔结环氧粉末外涂层技术规范及标准，建议根据CSA Z245．20—2006和ISO 21809．2- 2007修订国内相关标准。建议提高环氧粉末原材料含水量测试方法的具体要求；适当提高阴极剥 离技术指标的要求；钢管表面处理及涂装要求参考借鉴NACE 0394—2002标准的具体规定：针对涂 装工艺评定，增加对环氧固化度和界面杂质含量的相关规定，增加对涂层长期高温阴极剥离试验的 要求；针对涂装质量检验，增加对环氧固化度、热特性、24 h热水浸泡附着力、界面杂质含量等的检测 频次要求，以及对喷涂压力监控质量进行检验的规定；增加针对低温环氧粉末的相关要求。(表4， 参8) 关键词：管道；熔结环氧粉末；防腐涂层；标准 中图分类号：T-6531．657 文献标识码：A doi：10．6047／j．issn．1000．8241．2013．05．020 Comparative analysis on worldwide standards in fusion bonded epoxy powder coating of oil and gas pipelines 一 ● ?- ●-● Pan Honglil，Zhao Jinyunl，Zhang Fen91，Liu Linglil，Zhao Junl，Yang Jianjan2，Su Lei3 1．National Engineering Laboratory of Transponation Safety of OilGas Pipeline，PetroChina Pipeline RD Center Langfang，Hebei，065000；2．PetroChina Pipeline Construction Administration Department，Beijing，100101：3．Zhongyuan OilGas Transportation Sub—Company,PetroChina Pipeline Company,Dezhou．Shandong．253020 Abstract：In this paper,the authors comparatively analyze the codes and standards worldwide on fusion bonded epoxy(FBE) powder coating of oil and gas pipelines in terms of coating structure，raw materials index and coating procedure，surface preparation and coating requirements，etc，and suggest that relevant inland standards should be revised according to CSA Z245．20—2006 and ISO 21809．2-2007．The suggestions include improving specific requirements in detection method for raw material，water content of epoxy powder and appropriately improving the requirements in cathodic disbonding technical indicators，referring the special provisions specified in NACE 0394—2002 to make surface preparation of steel pipe and coating，complementing the relative provisions in epoxy curing degree and interface impurity content and the requirements in coating cathodic disbonding test under th