基于MCG的传送带自动配料系1.doc

基于MCGS的传送带自动配料系统 内容摘要 随着计算机、网络通讯、自动化技术的发展,工厂及生产线的建设和改造正朝着自动化、网络化、信息化的方向发展。传送带是生产系统中的重要物料输送工具,但现在仍有不少传送带采用功能单一的按钮式电气控制柜控制,已不能满足现代生产线物料输送管理的需要。本课题以传送带为主要控制对象,采用基于PLC的控制系统以及Wincc监控系统来构建新一代的传送带输送控制平台。借助可编程控制器S7-200系列PLC强大的编程功能和Wincc组态软件完善的人机界面设计功能，本系统可以大幅度减轻了一线工人劳动强度和现场管理难度，加强了安全系数，体现了以人为本的原则，使生产和管理更趋规范化、科学化。 本系统采用四节传送带电路，以PLC为控制核心，以Wincc软件组态的人机界面为监控中心，具备顺序起动和顺序停止功能；当某条传送带发载料超重时，前面的皮带机立即停止，该传送带及其后面传送带延时停止的自动控制功能；当某条传送带发生故障时，该传送带及其前面的传送带立即停止的自动控制等功能。 关键词： 可编程控制器； Wincc组态软件  Abstract With the development of computer, network communication and automation technology, the constructing and rebuilding of manufactory and production line are developing in automation, network and information fashion. Conveyor belt is one of the important means of conveyance. However, some conveyor belts are still controlled by old consoles which only have basic functions, which cannot meet the need of modern management of warehouse. Focusing on the control of conveyor belt, this paper will constructing a new console platform based on the Wincc monitoring system and the PLC control system. With the programmable controller s7 -200 series of the PLC programmable and the Wincc configuration software perfect man-machine interface design functionality, the system can lighten the working strength of the workers, reduce the difficulty of the spot management greatly and can enhance the safety factor. So it reflects the principle of the people oriented and make production and management become more standardization and scientific. using plc for control center，the man-machine the Wincc software configured for surveillance center, the conveyor possess sequence starting and sequence stopping function; When a conveyor belt in material overweight, In front of the belt conveyor stop immediately, The conveyor belt and following conveyors delay stop of automatic control function; When one of the conveyor belt is at fault, The conveyor belt and forward conveyors to immediately stop of automatic control function. K