汽车内饰阻燃标准-TL1010-2008中英文.pdf

Group Standard TL 1010 Issue 2008-01 Class. No.: 55000 Descriptors: flammability, combustibility, burning behavior, flame retardance, interior trim Check standard for current issue prior to usage. Page 1 of 3 The English translation is believed to be accurate. In case of discrepancies the German version shall govern. Numerical notation acc. to ISO practice. This electronically generated standard is authentic and valid without signature. Technical responsibility Standards GQL-LP Dr. Peter Schwarzer GQL-LP/5 Eckart Herrmann Tel.: +49-5361-9-42116 EKTC/4 Jürgen Wiesner Tel.: +49-5361-9-29064 EKTC Manfred Terlinden Confidential. All rights reserved. No part of this document may be transmitted or reproduced without the prior permission of a Standards Department within the Volkswagen Group. Contract partners shall obtain the standard only through the B2B supplier platform . ? VOLKSWAGEN AG vwnorm-2007-07 D Materials for Vehicle Interiors Burning Behavior, Material Requirements Previous issues TL 1010: 1971-10, 1972-04, 1972-09, 1974-08, 1975-09, 1985-02, 1993-01 Changes The following changes have been made as compared to Technical Supply Specification TL 1010: 1997-05:  Section 3.1 expanded 1 Scope This Technical Supply Specification defines requirements for the burning behavior of materials/ components in the passenger compartment. It pertains to every part of a single or composite material whose surface contacts the air space of the passenger compartment and that is located within a maximum depth of 13 mm (1/2 inch) from the passenger compartment surface. For parts that are joined over less than the full surface area and that succeed each other during assembly, the depth of 13 mm shall be taken into consideration again after removal of the part closest to the passenger compartment (see Figure 1), until a layer exists that is thicker than 13 mm or an overall depth of 26 mm (1 inch) has been reached. 2 Definitions M a t e r i a l s /