USB功放电路：tp6902.pdf

TP6902 USB Audio Controller 1 tenx technology, inc. Rev 1.1 2005/07/07 GENERAL DESCRIPTION The TP6902 is an 8-bit micro-controller embedded device tailored to the USB audio application. It is able to play two channels PC audio through Full-Speed USB bus. FEATURE Compliance with the Universal Serial Bus specification v2.0 Full-Speed Built-in USB Transceiver 3.3V Regulator Isochronous transfer with adaptive synchronization High performance 48KHz sampling rate for audio playback Two channel audio Class-D Amplify for speaker driving 64-level volume control, VR adjustment available Support USB Suspend function 24MHz crystal oscillation 28 pin package BLOCK DIAGRAM USB Transceiver USB SIE USB Controller Dual Audio DMA buffer 8-bit RISC CPU 192 Bytes SRAM 4K x 14 Mask ROM Class-D Audio Amplify DMA/Audio Controller TP6902 2 tenx technology, inc. Rev 1.1 2005/07/07 PIN DESCRIPTION Name I/O Description V33 O 3.3V Regulator output VSS P Ground VDD P 5V Power from USB cable ADC I VR input for volume adjustment X1 I Crystal in (24MHz) X2 O Crystal out RESETn I Chip reset (active low) TESTn I Test Mode control (active low) DP I/O USB positive data signal DM I/O USB negative data signal AVDD P 5V Power for Audio output AVSS P Ground for Audio output AUDIOLP O Audio output AUDIOLN O Audio output AUDIORP O Audio output AUDIORN O Audio output PB[7:0] I/O General purpose I/O (Pseudo Open Drain) PIN ASSIGNMENT AVDD AUDIOLN AVSS PB[5] PB[4] RESETn TESTn VSS X2 X1 PB[3] PB[2] AVSS AUDIORN AUDIOLP AVSS PB[6] PB[7] DP DM V33 VDD ADC PB[0] PB[1] AVSS AUDIORP AVDD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 TP6902 28 pin HSOP TP6902 3 tenx technolog