Installation,Maintenance,Repair.PDFVIP

RP/IS-007 Installation, Maintenance, Repair Series 007 and LF007 Double Check Valve Assemblies Sizes: 1?2 – 3 (15 - 80mm) ! WARNING Read this Manual BEFORE using this equipment. 3?4 007M3QT Failure to read and follow all safety and use information can result in death, serious personal injury, property damage, or damage to the equipment. Keep this Manual for future reference. Installation Instructions ! WARNING Series 007 and LF007 Local building or plumbing codes may require modifications 1 to the information provided. You are required to ?2 - 2 (15 - 50mm) consult the local building and plumbing codes prior to installation. If the information provided here is not consis- tent with local building or plumbing codes, the local codes Indoors - Figure 1 should be followed. This product must be installed by a Check local codes for installation requirements. Pipe lines should licensed contractor in accordance with local codes and be thoroughly flushed to remove foreign material before installing ordinances. the unit. A strainer should be installed as shown, ahead of backflow preventer to prevent disc from unnecessary fouling. Install valve inline with arrow on valve body pointing in the direction of flow. ! WARNING For indoor installations, it is important that the valve be easily acces- sible to facilitate testing and servicing. D