zl15轮式装载机整车布置设计-毕设论文.docVIP

ZL15轮式装载机整车布置设计_毕业设计论文 ZL15轮式装载机整车布置设计_毕业设计论文 ZL15轮式装载机整车布置设计 摘要 随着基建的迅猛发展，装载机已成了工程建设中重要的组成部分。本次设计主要针对ZL15轮式装载机的基本参数进行整车布置设计，要求既满足了基本的性能特点，又有具有其优点。通过查阅相关资料期刊，在了解了装载机基本结构后，进行总体结构的选择，包括传动形式，变矩器，变速箱，离合器，驱动桥，转向系统系统，制动系统。然后通过实测和参考同类车型，确定一些基本参数，如轴距，轮距，最小离地间隙等。最后根据已知参数进行总体布置设计和对整体性能的校核验算。 设计过程先用CAD画总体装配图，并用solidworks三维软件进行虚拟装配，画出了整机三维立体图。最后利用Matlab软件对总体性能分析，从而得出所设计的总体设计性能参数曲线，并进行优化设计，从而达到最终目的。 关键词：Zl15轮式装载机，整车布置,性能分析，Solidworks。 ZL15 WHEEL LOADER LAYOUT DESIGN Abstract With the rapid development of infrastructure, loader has become an important part in engineering construction.The mission of this time is design of overall layout of ZL15 wheel loader.And,it meets the basic performance characteristics,also,has its avantages.This design first refer to the books and journals that about the loader design.To have a comprehensive understanding of loader.Second,on the choice of the general structure, including transmission form, torque converter, gearbox, clutch, axles, steeringSystems, braking system. Through the measured and reference similar models, establish some basic parameters, such as the wheelbase, between, the minimum ground clearance is achieved, etc.According to the parameters that have known to design the general layout.On the overall performance of checking checking. In design process,first use the CAD to draw the overall picture,then,use Solidwords software for the 3d virtual assembly,final,finish the 3d drawing.Last,use the Matlab to analysis the performance of loader,and final to achieve purpose. KEY WORDS: Wheel Loader ,Performance annlysis,Solidworks. 目 录  TOC \o 1-4 \u  TOC \o 1-4 \h \z \u HYPERLINK \l _Toc232091734第1章 概述 1 HYPERLINK \l _Toc2320917351.1 课题研究的背景及意义 1 HYPERLINK \l _Toc2320917361.2 轮式装载机发展概况 1 HYPERLINK \l _Toc2320917431.3 轮式装载机未来发展趋势 1 HYPERLINK \l _Toc2320917431.4 课题研究的主要内容及意义 2 HYPERLINK \l _Toc2320917461.4.1 课题研究的主要内容 2 HYPERLINK \l _Toc2320917461.4.2 课题研究的意义 2 HYPERLINK \l _Toc232091744第2章 装载机总成结构的选择 3 HYPERLI