基于plc的电梯控制系统设计-学位论文.docVIP

PAGE  毕业论文 题 目 基于PLC的电梯控制系统设计 学 号 姓 名 赵 明 专业班级 学 院 电气工程学院 指导教师 基于PLC的电梯控制系统设计 摘 要 近些年来，由于世界大环境的发展，各国人们水平也不断提高。高层建筑作为城市化的产物也得以突飞猛进的发展，高层建筑的发展直接带动了电梯的发展，电梯的变化也比较大，更新换代也是日新月异。从目前的趋势来看，电梯不论是在高层建筑里，还是在许多多层建筑里，电梯都是非常重要的生活工具。 本文介绍的是基于PLC系统控制的电梯。由于PLC的特点，使它在近年来应用非常广泛，就电梯控制系统来说，它成功的取代了原始的继电器控制电梯。本次控制系统是由PLC以及相应的逻辑电路组成，具体的包括：按钮开关、行程开关、交流异步电动机、继电器、七段显示数码管、变频器等。并使用三菱公司出产的PLC对系统进行编程与控制。 关键词 可编程逻辑控制器,电梯控制,三菱FX2N-80MR ABSTRACT In recent years, as the development of the world environment, the rising level of people all over the world. The product as a city of high-rise buildings can also make a spurt of progress of development, the development of the high-rise building directly to the development of the elevator, the elevator changes are relatively large, renewal and change rapidly. From the current trend, elevators in high-rise building, or in many multistory building, the elevator is a very important tool for life. This paper introduces the elevator PLC control system based on. Because of the characteristic of PLC, so it is widely used in recent years, on the elevator control system, it successfully replaced the original relay control elevator. The control system is composed of PLC and the corresponding logic circuit, including: button switch, travel switch, AC asynchronous motor, relay, seven digital tube display, and frequency converter. And carries on the programming and control of the system using the Mitsubishi Co production of PLC. Key Words: PLC Elevator control Mitsubishi FX2N-80MR 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc357457295 1. 绪论  PAGEREF _Toc357457295 \h 1  HYPERLINK \l _Toc357457296 1.1设计电梯的目的  PAGEREF _Toc357457296 \h 1  HYPERLINK \l _Toc357457297 1.2设计电梯的意义  PAGEREF _Toc357457297 \h 2  HYPERLINK \l _Toc357457298 1.3电梯的国内外发展现状  PAGEREF _Toc3574