江泉电子扩展项目地基处理方案设计cfg桩基础毕设论文.docVIP

河北工程大学毕业设计  PAGE \* MERGEFORMAT II  PAGE \* MERGEFORMAT I 摘要 地基处理的目的主要是提高地基强度和控制地基变形，为建筑物建设和以后的使用提供安全保障。本毕业设计所涉及的建筑物场地为邯郸江泉电子扩展项目，工程条件较差，天然承载力不足，因此需要对天然地基处理，以满足建筑物对地基强度要求的需要。 常用的地基处理方法有桩基础和复合地基，根据该场地的各种岩土工程勘察资料，本毕业设计对场地地质条件进行室内土工试验分析和现场原位试验评价，通过比较各种地基处理加固方法和施工工艺程序，决定采用CFG桩复合地基进行处理。设计的主要内容为桩长选取20m和桩径选取500mm，单桩承载力的计算结果为1078kN，桩间距1.53×1.66m及面积置换率7.7％，计算复合地基承载力500kPa和沉降量31.83mm，满足建筑物的安全。 关键词：地基处理 复合地基 CFG 单桩承载力 Abstract The main purpose of the foundation treatment is improve the?strength of foundation and deformation?control of foundation,?to provide security for the?use of the building?construction and?future.?The?graduation design of the?building site for?Handan jiangquan elect?expansion project,?engineering?conditions,?natural?bearing capacity is insufficient,so we?need make a natural foundation?treatment,?in order to meet the needs of?the building requirements。 The common foundation treatment methods consist of pile foundation and composite foundation, according to the site of all kinds of geotechnical engineering investigation data about this item, the graduation design evaluate geological conditions of indoor soil test analysis and in-situ test . By comparing all kinds of foundation reinforcement method and construction process, the CFG pile foundation treatment is chosen .?The main contents of design is that the pile length choose 20m and pile diameter select 500mm, single pile bearing force calculation results for 1078kN, pile spacing of 1.66×1.53m and area displacement rate of 7.7% and calculation of composite foundation bearing capacity 31.83mm and settlement of the calculus 500kPa. This design can ensure the building safety. Keywords:?foundation treatment composite foundation CFG the bearing capacity of?single pile  PAGE \* MERGEFORMAT IV  PAGE \* MERGEFORMAT III 目 录 TOC \o 1-3 \h \u 绪论  PAGEREF _Toc5865 1 第 1 章 工程概况  PAGEREF _Toc9428 2 1.1 工程简介  PAGEREF _Toc7780 2 1.2 勘察目的、任务  PAGEREF _Toc2028 2 1